Új hozzászólás Aktív témák

• #5100 leventekov csendes újonc

  Új Válasz 2017-02-13 18:06:36 #5100

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  leventekov

  csendes újonc

  Sziasztok
  Segitseget szeretnek kerni.

  egy lampat szeretnek megadott idore kapcsolni. Be es Ki
  es egy gombot mikor nem villagit be lehessen kapcsolni es ugyan azzal ki.

  /*

  Akvárium vezérlés

  */
  #include <Wire.h>
  #include <LiquidCrystal.h>
  //declare variables
  float tempC;
  float temp2C;
  int tempPin = 1;
  int temp2Pin = 2;

  int buttonPin = 10 ;
  boolean currentState = LOW;//stroage for current button state
  boolean lastState = LOW;//storage for last button state
  boolean ledState = LOW;//storage for the current state of the LED (off/on

  int hour;
  int minute;
  int second;
  LiquidCrystal lcd(12, 11, 5, 4, 3, 2);

  int co2Pin = 0; // co2 szelep
  int regvilPin = 1; // reggeli villagita
  int ledPin = 13; // ledszallag
  int napalivilPin = 9; // napalivillagitas
  int tap1Pin = 7; // tap 1 pumpa
  int tap2Pin = 8; // tap 2 pumpa
  int tap3Pin = 6; // tap 2 pumpa

  void setup()
  {

  lcd.begin(16, 4);
  Wire.begin();
  pinMode(co2Pin, OUTPUT);
  digitalWrite(co2Pin, LOW);
  digitalWrite(napalivilPin, LOW);
  pinMode(napalivilPin,OUTPUT);
  digitalWrite(regvilPin, LOW);
  pinMode(regvilPin, OUTPUT);
  pinMode(ledPin, OUTPUT);
  digitalWrite(ledPin, LOW);
  pinMode(tap1Pin, OUTPUT);
  digitalWrite (tap1Pin, LOW);
  pinMode (tap2Pin, OUTPUT);
  digitalWrite (tap2Pin, LOW);
  pinMode (tap3Pin, OUTPUT);
  digitalWrite (tap3Pin, LOW);

  pinMode(buttonPin, INPUT);//this time we will set the pin as INPUT
  pinMode(ledPin, OUTPUT);
  Serial.begin(9600);//initialize Serial connection

  }
  void loop()
  {

  Wire.beginTransmission(104);
  Wire.write(0x00);
  Wire.endTransmission();
  Wire.requestFrom(104, 7);
  second = Wire.read();
  minute = Wire.read();
  hour = Wire.read();
  hour=hour/16 * 10 + hour % 16;
  minute=minute/16 * 10 + minute % 16;
  second=second/16 * 10 + second % 16;

  lcd.setCursor(1,0);
  lcd.print("Time ");
  lcd.print(hour);
  lcd.print(":");
  if (minute < 10) { lcd.print("0"); }
  lcd.print(minute);
  lcd.print(":");
  if (second < 10) { lcd.print("0"); }
  lcd.print(second);

  tempC = analogRead(tempPin); //read the value from the sensor
  tempC = (5.0 * tempC * 100.0)/1024.0; //convert the analog data to temperature
  temp2C = analogRead(temp2Pin); //read the value from the sensor
  temp2C = (5.0 * temp2C * 100.0)/1024.0; //convert the analog data to temperature

  // print result to lcd display
  lcd.setCursor(1,1);
  lcd.print("Viz");
  lcd.setCursor(10, 1);
  lcd.print(tempC,1);
  lcd.print("'C");

  lcd.setCursor(1,2);
  lcd.print("Szoba");
  lcd.setCursor(10, 2);
  lcd.print(temp2C,1);
  lcd.print("'C");
  lcd.setCursor(1,3);
  if (hour*60+minute >= 540 && hour*60+minute <=1020 ) // CO@ adagolas kiirasa 9:00 - 17:00
  {lcd.print("CO2 ADAGOLAS");}
  {
  lcd.print("CO2 KIKAPCSOLT");
  }
  if (hour*60+minute >= 1020 and hour*60+minute <= 540)
  //----------------------------------------------------------------------------------
  //Tápoldat 1 adagolás 7:00:00-kor 5mp

  if (hour*360+minute*60+second >= 2520 and hour*360+minute*60+second <= 2522)
  {digitalWrite (tap1Pin, HIGH);}
  else
  {digitalWrite (tap1Pin, LOW);}

  //----------------------------------------------------------------------------------
  //Tápoldat 2 adagolás 7:00:10-kor 5mp

  if (hour*360+minute*60+second >= 2523 and hour*360+minute*60+second <= 2525)
  {digitalWrite (tap2Pin, HIGH);}
  else
  {digitalWrite (tap2Pin, LOW);}

  //----------------------------------------------------------------------------------
  //Tápoldat 3 adagolás 7:00:10-kor 5mp

  if (hour*360+minute*60+second >= 2526 and hour*360+minute*60+second <= 2528)
  {digitalWrite (tap3Pin, HIGH);}
  else
  {digitalWrite (tap3Pin, LOW);}

  //-----------------------------------------------------------------------------------
  //CO2 vezerles: Be: 09:00 Ki: 17:00

  if (hour*60+minute >= 540 && hour*60+minute <=1020 )
  {digitalWrite (co2Pin, HIGH);}
  else
  {digitalWrite (co2Pin, LOW);}
  //................................................................................
  //Reggeli villagitas : Be: 11:00 Ki : 19:00

  if (hour*60+minute >= 660 && hour*60+minute <= 1140)
  {digitalWrite (regvilPin, HIGH);}
  else
  {digitalWrite (regvilPin, LOW);}

  //--------------------------------------------------------------------------------
  // Nappali Villagitas e: 14:00 Ki: 16:00

  if (hour*60+minute >= 840 && hour*60+minute <= 960)
  {digitalWrite (napalivilPin, HIGH);}
  else
  {digitalWrite (napalivilPin, LOW);}

  //----------------------------------------------------------------

  //................................................................................
  //Esteji villagitas : Be: 11:00 Ki : 19:00

  if (hour*60+minute >= 660 && hour*60+minute <= 1140)
  {digitalWrite (regvilPin, HIGH);}
  else
  {digitalWrite (regvilPin, LOW);}

  currentState = digitalRead(buttonPin);
  if (currentState == HIGH && lastState == LOW){//if button has just been pressed
  Serial.println("pressed");
  delay(1);//crude form of button debouncing

  //toggle the state of the LED
  if (ledState == HIGH){
  digitalWrite(ledPin, LOW);
  ledState = LOW;
  } else {
  digitalWrite(ledPin, HIGH);
  ledState = HIGH;

  }

  }
  lastState = currentState;
  }

  //
  KB igy nez ki

Új hozzászólás Aktív témák