Új hozzászólás Aktív témák

• #4902 PetX aktív tag bacus #4901

  Új Válasz 2018-04-22 10:09:29 #4902

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  PetX

  aktív tag

  válasz bacus #4901 üzenetére

  Kicsit fejtsd ki, mert nem értem.

  Készítettem egy képet hátha az segít:
  [kép]

  MMM MMM KKK TTTTTTTTTTT KKK
MMMM MMMM KKK TTTTTTTTTTT KKK
MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK
MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK
MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK
MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK

MikroTik RouterOS 6.39.2 (c) 1999-2017 http://www.mikrotik.com/

[?] Gives the list of available commands
command [?] Gives help on the command and list of arguments

[Tab] Completes the command/word. If the input is ambiguous,
a second [Tab] gives possible options

/ Move up to base level
.. Move up one level
/command Use command at the base level
[admin@MikroTik] >
caps-man file log queue special-login beep password setup
certificate interface mpls radius system blink ping undo
console ip port routing tool export quit
driver ipv6 ppp snmp user import redo
[admin@MikroTik] > export
# apr/22/2018 10:15:20 by RouterOS 6.39.2
# software id = GUVT-VM6L
#
/interface bridge
add admin-mac=CC:2D:E0:54:76:C3 auto-mac=no comment=defconf name=bridge
/interface ethernet
set [ find default-name=ether2 ] name=ether2-master
set [ find default-name=ether3 ] master-port=ether2-master
set [ find default-name=ether4 ] master-port=ether2-master
/ip neighbor discovery
set ether1 discover=no
/interface wireless security-profiles
add authentication-types=wpa-psk,wpa2-psk eap-methods="" group-ciphers=\
tkip,aes-ccm management-protection=allowed mode=dynamic-keys name=petx \
supplicant-identity="" unicast-ciphers=tkip,aes-ccm wpa-pre-shared-key=\
gyalogkakukk wpa2-pre-shared-key=gyalogkakukk
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n disabled=no distance=indoors \
frequency=2437 security-profile=petx ssid=Lehallgatokocsi \
wireless-protocol=802.11
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=default-dhcp disabled=no interface=bridge name=defconf
/interface bridge port
add bridge=bridge comment=defconf interface=ether2-master
/ip address
add address=192.168.88.1/24 comment=defconf interface=bridge network=\
192.168.88.0
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=wlan1
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 name=router
/ip firewall filter
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment="defconf: accept established,related" \
connection-state=established,related
add action=drop chain=input comment="defconf: drop all from WAN" in-interface=\
ether1
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment="defconf: accept est
connection-state=established,related
add action=drop chain=forward comment="defconf: drop invalid
invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-na
connection-state=new in-interface=ether1
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquer
wlan1
/ip upnp
set enabled=yes
/ip upnp interfaces
add interface=ether3 type=internal
add interface=bridge type=external
/system clock
set time-zone-name=Europe/Budapest
/tool mac-server
set [ find default=yes ] disabled=yes
add interface=bridge
/tool mac-server mac-winbox
set [ find default=yes ] disabled=yes
add interface=bridge
[admin@MikroTik] >
[admin@MikroTik] >

Új hozzászólás Aktív témák