Új hozzászólás Aktív témák

• #21296 Bici félisten sonar #21295

  Új Válasz 2014-11-12 08:27:42 #21296

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  Bici

  félisten

  válasz sonar #21295 üzenetére

  Ezt adja ki:

  /dev/sda:
  
  ATA device, with non-removable media
  Model Number: WDC WD3200BEKX-00B7WT0
  Serial Number: WD-WXA1A8300731
  Firmware Revision: 01.01A01
  Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
  Standards:
  Supported: 8 7 6 5
  Likely used: 8
  Configuration:
  Logical max current
  cylinders 16383 16383
  heads 16 16
  sectors/track 63 63
  --
  CHS current addressable sectors: 16514064
  LBA user addressable sectors: 268435455
  LBA48 user addressable sectors: 625142448
  Logical/Physical Sector size: 512 bytes
  device size with M = 1024*1024: 305245 MBytes
  device size with M = 1000*1000: 320072 MBytes (320 GB)
  cache/buffer size = 16384 KBytes
  Nominal Media Rotation Rate: 7200
  Capabilities:
  LBA, IORDY(can be disabled)
  Queue depth: 32
  Standby timer values: spec'd by Standard, with device specific minimum
  R/W multiple sector transfer: Max = 16 Current = 16
  Advanced power management level: 128
  DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
  Cycle time: min=120ns recommended=120ns
  PIO: pio0 pio1 pio2 pio3 pio4
  Cycle time: no flow control=120ns IORDY flow control=120ns
  Commands/features:
  Enabled Supported:
  * SMART feature set
  Security Mode feature set
  * Power Management feature set
  * Write cache
  * Look-ahead
  * Host Protected Area feature set
  * WRITE_BUFFER command
  * READ_BUFFER command
  * NOP cmd
  * DOWNLOAD_MICROCODE
  * Advanced Power Management feature set
  Power-Up In Standby feature set
  * SET_FEATURES required to spinup after power up
  SET_MAX security extension
  * 48-bit Address feature set
  * Device Configuration Overlay feature set
  * Mandatory FLUSH_CACHE
  * FLUSH_CACHE_EXT
  * SMART error logging
  * SMART self-test
  * General Purpose Logging feature set
  * WRITE_{DMA|MULTIPLE}_FUA_EXT
  * 64-bit World wide name
  * IDLE_IMMEDIATE with UNLOAD
  * {READ,WRITE}_DMA_EXT_GPL commands
  * Segmented DOWNLOAD_MICROCODE
  * Gen1 signaling speed (1.5Gb/s)
  * Gen2 signaling speed (3.0Gb/s)
  * Gen3 signaling speed (6.0Gb/s)
  * Native Command Queueing (NCQ)
  * Host-initiated interface power management
  * Phy event counters
  * Idle-Unload when NCQ is active
  * NCQ priority information
  * unknown 76[15]
  * DMA Setup Auto-Activate optimization
  Device-initiated interface power management
  * Software settings preservation
  * SMART Command Transport (SCT) feature set
  * SCT Write Same (AC2)
  * SCT Features Control (AC4)
  * SCT Data Tables (AC5)
  unknown 206[7]
  unknown 206[12] (vendor specific)
  unknown 206[13] (vendor specific)
  unknown 206[14] (vendor specific)
  Security:
  Master password revision code = 65534
  supported
  not enabled
  not locked
  frozen
  not expired: security count
  supported: enhanced erase
  62min for SECURITY ERASE UNIT. 62min for ENHANCED SECURITY ERASE UNIT.
  Logical Unit WWN Device Identifier: 50014ee65923c06d
  NAA : 5
  IEEE OUI : 0014ee
  Unique ID : 65923c06d
  Checksum: correct

Új hozzászólás Aktív témák