Új hozzászólás Aktív témák

• #33168 hcl titán arcoskönyv #33167

  Új Válasz 2023-03-08 20:15:21 #33168

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  hcl

  titán

  LOGOUT blog (1)

  válasz arcoskönyv #33167 üzenetére

  Itt közben lement a long test

  $ sudo smartctl -a /dev/sdd 
[sudo] colt jelszava:  
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-206-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Black
Device Model:     WDC WD5000BPKT-00PK4T0
Serial Number:    WD-WX21A82A7161
LU WWN Device Id: 5 0014ee 6581ba668
Firmware Version: 01.01A01
User Capacity:    500.107.862.016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed Mar  8 20:13:26 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
               without error or no self-test has ever  
               been run.
Total time to complete Offline  
data collection:        ( 8700) seconds.
Offline data collection
capabilities:            (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
               General Purpose Logging supported.
Short self-test routine  
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  88) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x7035) SCT Status supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
 3 Spin_Up_Time            0x0027   190   164   021    Pre-fail  Always       -       1466
 4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       657
 5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
 7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
 9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       1870
10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       489
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       166
193 Load_Cycle_Count        0x0032   190   190   000    Old_age   Always       -       31703
194 Temperature_Celsius     0x0022   122   092   000    Old_age   Always       -       25
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      1869         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
   1        0        0  Not_testing
   2        0        0  Not_testing
   3        0        0  Not_testing
   4        0        0  Not_testing
   5        0        0  Not_testing
Selective self-test flags (0x0):
 After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

  Ez alapján sincs semmi baja. És most gyors is.
  De akkor mi a frász volt a baja az előző pár boot alkalmával? :S

  Gondolom ha 1 hétig nem használom megint, akkor megint tetű módban fog indulni...

Új hozzászólás Aktív témák