Új hozzászólás Aktív témák

• #1323 Male nagyúr Male #1263

  Új Válasz 2004-09-22 10:27:15 #1323

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  Male

  nagyúr

  válasz Male #1263 üzenetére

  Még mindíg nem megy az ADSL UHU alól.
  Kipróbáltam, de ez nem oldotta meg a gondomat. Továbbra se jön be semmi. Olyan mintha valami féloldalas ADSL kapcsolat jönne létre, a gépem küldi az adatokat, de nem kap semmit.
  Bemásolom az adsl-setup beállításomat. Ez egy kicsit hosszú lesz, de hátha így valaki már tud segíteni:
  root:~# adsl-setup
  Welcome to the Roaring Penguin ADSL client setup. First, I will run
  some checks on your system to make sure the PPPoE client is installed
  properly...
  
  Looks good! Now, please enter some information:
  
  USER NAME
  
  >>> Enter your PPPoE user name (default okofat): okofat
  
  INTERFACE
  
  >>> Enter the Ethernet interface connected to the ADSL modem
  For Solaris, this is likely to be something like /dev/hme0.
  For Linux, it will be ethn, where 'n' is a number.
  (default eth0): eth0
  
  Do you want the link to come up on demand, or stay up continuously?
  If you want it to come up on demand, enter the idle time in seconds
  after which the link should be dropped. If you want the link to
  stay up permanently, enter 'no' (two letters, lower-case.)
  NOTE: Demand-activated links do not interact well with dynamic IP
  addresses. You may have some problems with demand-activated links.
  >>> Enter the demand value (default no): no
  
  DNS
  
  Please enter the IP address of your ISP's primary DNS server.
  If your ISP claims that 'the server will provide DNS addresses',
  enter 'server' (all lower-case) here.
  If you just press enter, I will assume you know what you are
  doing and not modify your DNS setup.
  >>> Enter the DNS information here: server
  
  PASSWORD
  
  >>> Please enter your PPPoE password:
  >>> Please re-enter your PPPoE password:
  
  FIREWALLING
  
  Please choose the firewall rules to use. Note that these rules are
  very basic. You are strongly encouraged to use a more sophisticated
  firewall setup; however, these will provide basic security. If you
  are running any servers on your machine, you must choose 'NONE' and
  set up firewalling yourself. Otherwise, the firewall rules will deny
  access to all standard servers like Web, e-mail, ftp, etc. If you
  are using SSH, the rules will block outgoing SSH connections which
  allocate a privileged source port.
  
  The firewall choices are:
  0 - NONE: This script will not set any firewall rules. You are responsible
  for ensuring the security of your machine. You are STRONGLY
  recommended to use some kind of firewall rules.
  1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
  2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
  for a LAN
  >>> Choose a type of firewall (0-2): 1
  
  ** Summary of what you entered **
  
  Ethernet Interface: eth0
  User name: okofat
  Activate-on-demand: No
  DNS addresses: Supplied by ISP's server
  Firewalling: STANDALONE
  
  >>> Accept these settings and adjust configuration files (y/n)? y
  Adjusting /etc/ppp/pppoe.conf
  Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets
  (But first backing it up to /etc/ppp/pap-secrets-bak)
  (But first backing it up to /etc/ppp/chap-secrets-bak)
  
  
  
  Congratulations, it should be all set up!
  
  Type 'adsl-start' to bring up your ADSL link and 'adsl-stop' to bring
  it down. Type 'adsl-status' to see the link status.
  root:~# adsl-start
  . Connected!
  root:~# adsl-status
  adsl-status: Link is up and running on interface ppp0
  ppp0 Link encapoint-to-Point Protocol
  inet addr:82.131.185.197 P-t-P:213.163.27.23 Mask:255.255.255.255
  UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
  RX packets:9 errors:0 dropped:0 overruns:0 frame:0
  TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:3
  RX bytes:366 (366.0 b) TX bytes:54 (54.0 b)
  
  Itt elindítottam a böngészőt, és beírtam egy címet, természetesen az oldal nem jött be.
  
  root:~# adsl-status
  adsl-status: Link is up and running on interface ppp0
  ppp0 Link encapoint-to-Point Protocol
  inet addr:82.131.185.197 P-t-P:213.163.27.23 Mask:255.255.255.255
  UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
  RX packets:20 errors:0 dropped:0 overruns:0 frame:0
  TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:3
  RX bytes:894 (894.0 b) TX bytes:54 (54.0 b)
  
  Mi lehet a gond?

Új hozzászólás Aktív témák