Keresés

Hirdetés

Új hozzászólás Aktív témák

  • Metalfan

    senior tag

    válasz stefi68 #704 üzenetére

    Nem, nem éppen érthető, de erről nem Te tehetsz ;) Lefordíttattam angolra, és pár helyen kicsit érthetőbbre írtam át a szöveget:

    1. Install a new Samsung PC Studio 1.1.2. Then install the drivers for the phone and it is very important: Synchronize contacts from the phone company PTT because flash will erase all data, contacts and settings from phone memory.

    2. If you are sure that the phone communicates with the PC, turn off the phone, remove the SIM card, the memory card and the battery.

    3. Insert the batteries, but do not switch on the phone.

    4. Press (and hold (?)) the "down" button and click on the "Camera" and then the "red handset" button. The phone must be switched on to download. (Megjegyzés: amíg ezt nem csináltuk meg, addig ne dugjuk rá az adatkábelt a telefonra!)

    5. Start the program called "MultiLoader V5.56". Make sure that the version of program is correct! Press the Port search. Request S5230 detect the COM port.

    6. Select download BRCM2133 help files:
    - Boot: prompt, type the path to the folder Boot, which is whether the software files
    - Amss: Rename apps_compressed.bin in amss_compressed.bin
    - Rsrc1: Enter the file extension, such as RC1. Rsrc_S5230_Open_Europe_Common.rc1
    - Rsrc2: Enter the file *. * Low RC2 (Mid-del is működik nálam, igazából nem tudom, hogy mi a különbség a kettő között)
    - Factory FS: FactoryFs_S5230_Open_Europe_Common_Poland.ffs (vagy egyéb nevű FFS kiterjesztésű fájl)

    7. Press Download button and wait for finish firmware upload process. When you restart the phone with the new software, check software version with * # 1234 #

    8. Insert SD and SIM card into your phone and sync contacts Samsung PC Studio.

    Remélem így már jobb ;)

    [ Szerkesztve ]

Új hozzászólás Aktív témák