Aktív témák

• #9 Phobos aktív tag

  2003-06-16 11:42:48 #9

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  Phobos

  aktív tag

  NF-7V2.0
  
  --------------------------------------------------------------------------------
  
  nf7d14.exe Bios Issue Date: 2003/05/14
  Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads toIEEE1394 peer to peer function failure. AWDFLASH 8.23K is included in this BIOS package.
  Fixed CPU temperature too high issue.
  Raised highest CPU FSB up to 300 MHz for ''user define mode'' in
  SoftMenu.
  Fixed SATA RAID-0 data corruption issue by adding a new option
  ''EXT-P2P's Discard Time'' in ''integrated Peripherals''. The default
  setting is ''30 us'' ; which is recommended by NVidia. In case the problem is still there, try ''1 ms'' please.
  Changed DDR400 DRAM timing according to NVidia's recommendation.
  Updated BPL to v3.01 according to NVidia's recommendation.
  BIOS Compile Date: 5/14/2003.
  
  
  
  
  NF7V2.0
  
  --------------------------------------------------------------------------------
  
  nf7d11.exe Bios Issue Date: 2003/03/27
  Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With
  incorrect AWDFLASH version, the GUID will be erased, and leads to
  IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in
  this BIOS package.
  Fixes incorrectly detect Thorton 2600+ (166x12.5) CPU in Softmenu III.
  Fixes DRAM hang up at POST code EFh for specific memory module.
  Fix the problem that if used CPU 400FSB without User Define, it would not show DDR xxx (xxx=200,266,333,400).
  The default value of CPU FSB/DRAM freq revises to ''Auto''.
  Adds''CPU Disconnect Function'' to adjust C1 disconnects. The Chipset does not support C2 disconnect; thus, disable C2 function.
  Fixes DMI Pool data to be Socket A, Product Name: NF7-S/NF7 (nVidia-nForce2), Version: 2X.
  The frequency of CPU 1917Mhz revised to 1916MHz.
  Update SIP table to solve systems crashed issue while using 400FSB CPU+DDR 333, and revise the SIP Table of 266FSB CPU.
  The default value of ''Memory Timings'' revises to ''Optimal''.
  Updates BPL to be 2.94.
  Fix system can not show fan speed in PC Health Status while using lower speed FAN.
  Add''IDE Bus Master'' function to improve transfer speed of GHOST, and default value set up to disabled.
  Fix the problem that systems can not detect USB Drvice under WinME resume from S3,S4 mode, and lead to usb connector failed.
  Fine tune the OC ability of 333FSB CPU.
  BIOS Compile Date: 3/27/2003.
  
  

Aktív témák