Új hozzászólás Aktív témák

• #7131 zodo nagyúr Lenry #7130

  Új Válasz 2009-01-20 18:07:27 #7131

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  zodo

  nagyúr

  válasz Lenry #7130 üzenetére

  De azt nem értem, miért állítja az editor ,hogy az ubi a default amikor nem.
  Vagy tényleg ,ássam el magam?

  Légyszi ,nézz rá a menü listámra:

  # menu.lst - See: grub(8), info grub, update-grub(8)
  # grub-install(8), grub-floppy(8),
  # grub-md5-crypt, /usr/share/doc/grub
  # and /usr/share/doc/grub-doc/.

  ## default num
  # Set the default entry to the entry number NUM. Numbering starts from 0, and
  # the entry number 0 is the default if the command is not used.
  #
  # You can specify 'saved' instead of a number. In this case, the default entry
  # is the entry saved with the command 'savedefault'.
  # WARNING: If you are using dmraid do not use 'savedefault' or your
  # array will desync and will not let you boot your system.
  default 0

  ## timeout sec
  # Set a timeout, in SEC seconds, before automatically booting the default entry
  # (normally the first entry defined).
  timeout 10

  ## hiddenmenu
  # Hides the menu by default (press ESC to see the menu)
  #hiddenmenu

  # Pretty colours
  #color cyan/blue white/blue

  ## password ['--md5'] passwd
  # If used in the first section of a menu file, disable all interactive editing
  # control (menu entry editor and command-line) and entries protected by the
  # command 'lock'
  # e.g. password topsecret
  # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
  # password topsecret

  #
  # examples
  #
  # title Windows 95/98/NT/2000
  # root (hd0,0)
  # makeactive
  # chainloader +1
  #
  # title Linux
  # root (hd0,1)
  # kernel /vmlinuz root=/dev/hda2 ro
  #

  #
  # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

  ### BEGIN AUTOMAGIC KERNELS LIST
  ## lines between the AUTOMAGIC KERNELS LIST markers will be modified
  ## by the debian update-grub script except for the default options below

  ## DO NOT UNCOMMENT THEM, Just edit them to your needs

  ## ## Start Default Options ##
  ## default kernel options
  ## default kernel options for automagic boot options
  ## If you want special options for specific kernels use kopt_x_y_z
  ## where x.y.z is kernel version. Minor versions can be omitted.
  ## e.g. kopt=root=/dev/hda1 ro
  ## kopt_2_6_8=root=/dev/hdc1 ro
  ## kopt_2_6_8_2_686=root=/dev/hdc2 ro
  # kopt=root=UUID=A86C216A6C21348A loop=/ubuntu/disks/root.disk ro ROOTFLAGS=syncio

  ## default grub root device
  ## e.g. groot=(hd0,0)
  # groot=()/ubuntu/disks

  ## should update-grub create alternative automagic boot options
  ## e.g. alternative=true
  ## alternative=false
  # alternative=true

  ## should update-grub lock alternative automagic boot options
  ## e.g. lockalternative=true
  ## lockalternative=false
  # lockalternative=false

  ## additional options to use with the default boot option, but not with the
  ## alternatives
  ## e.g. defoptions=vga=791 resume=/dev/hda5
  # defoptions=quiet splash

  ## should update-grub lock old automagic boot options
  ## e.g. lockold=false
  ## lockold=true
  # lockold=false

  ## Xen hypervisor options to use with the default Xen boot option
  # xenhopt=

  ## Xen Linux kernel options to use with the default Xen boot option
  # xenkopt=console=tty0

  ## altoption boot targets option
  ## multiple altoptions lines are allowed
  ## e.g. altoptions=(extra menu suffix) extra boot options
  ## altoptions=(recovery) single
  # altoptions=(recovery mode) single

  ## controls how many kernels should be put into the menu.lst
  ## only counts the first occurence of a kernel, not the
  ## alternative kernel options
  ## e.g. howmany=all
  ## howmany=7
  # howmany=all

  ## should update-grub create memtest86 boot option
  ## e.g. memtest86=true
  ## memtest86=false
  # memtest86=true

  ## should update-grub adjust the value of the default booted system
  ## can be true or false
  # updatedefaultentry=false

  ## should update-grub add savedefault to the default options
  ## can be true or false
  # savedefault=false

  ## ## End Default Options ##

  title Ubuntu 8.10, kernel 2.6.27-9-generic
  root ()/ubuntu/disks
  kernel /boot/vmlinuz-2.6.27-9-generic root=UUID=A86C216A6C21348A loop=/ubuntu/disks/root.disk ro ROOTFLAGS=syncio quiet splash
  initrd /boot/initrd.img-2.6.27-9-generic

  title Ubuntu 8.10, kernel 2.6.27-9-generic (recovery mode)
  root ()/ubuntu/disks
  kernel /boot/vmlinuz-2.6.27-9-generic root=UUID=A86C216A6C21348A loop=/ubuntu/disks/root.disk ro ROOTFLAGS=syncio single
  initrd /boot/initrd.img-2.6.27-9-generic

  title Ubuntu 8.10, kernel 2.6.27-7-generic
  root ()/ubuntu/disks
  kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=A86C216A6C21348A loop=/ubuntu/disks/root.disk ro ROOTFLAGS=syncio quiet splash
  initrd /boot/initrd.img-2.6.27-7-generic

  title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
  root ()/ubuntu/disks
  kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=A86C216A6C21348A loop=/ubuntu/disks/root.disk ro ROOTFLAGS=syncio single
  initrd /boot/initrd.img-2.6.27-7-generic

  title Ubuntu 8.10, memtest86+
  root ()/ubuntu/disks
  kernel /boot/memtest86+.bin

  ### END DEBIAN AUTOMAGIC KERNELS LIST

  # This is a divider, added to separate the menu items below from the Debian
  # ones.
  title Other operating systems:
  root

  # This entry automatically added by the Debian installer for a non-linux OS
  # on /dev/sda1
  title Microsoft Windows XP Professional - magyar
  root (hd0,0)
  savedefault
  chainloader +1

Új hozzászólás Aktív témák