Új hozzászólás Aktív témák

• #4665 krealon veterán kicsiii #4662

  Új Válasz 2014-09-02 22:37:54 #4665

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  krealon

  veterán

  válasz kicsiii #4662 üzenetére

  Itt egy modszer a halott WRT1900AC felelesztesere:

  http://community.linksys.com/t5/Wireless-Routers/WRT1900AC-May-have-bricked-it/td-p/811096

  "I've found a way to manually switch the wrt1900ac from a trashed flash, to the secondary flash... It's done as follows:
  1. Reset the router by holding the reset button in until the PWR light starts to flash {mine takes about 15 sec's}
  2. Once the power light stops flashing, you can power off the router with the power switch.
  3. Turn the power back on and the PWR light will light. As soon as any other light turns on, power off the router with the power switch.
  4. Turn the power back on and the PWR light will light. As soon as any other light turns on, power off the router with the power switch.
  5. Turn the power back on and the PWR light will light. As soon as any other light turns on, power off the router with the power switch.
  6. Turn the power back on and the PWR light will light. This time just let the router power all the way up. It should now be on the alternate firmware.
  Yes, you will power off three times.
  Hope this works for you-all..."

Új hozzászólás Aktív témák