Aktív témák

• #5 BobMaster senior tag Shifty #4

  2002-05-26 15:07:09 #5

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  BobMaster

  senior tag

  válasz Shifty #4 üzenetére

  System Performance: Normal
  DRAM Clock: The item will synchronize DRAM clock operation.
  133MHz: DRAM is running at 133MHz frequency.
  By SPD: SDRAM clock by SPD data.
  The Choice: 100, [B]133[B], 166, SPD
  DRAM Timing: Select SPD for setting SDRAM timing by SPD.
  The Choice: Manual, SPD.
  SDRAM Cycle length: Default
  The Choice: 2, 2.5, 3
  Bank Interleave:
  The Choice: 2 Bank, 4 Bank, Disabled
  Precharge to Active (Trp): Setup the minimum row precharge time.
  The Choice: 2T, 3T
  Active to Precharge (Tras): Setup the minimum RAS pulse width.
  The Choice: 5T, 6T
  Active to CMD (Trcd): Setup the minimum CAS to RAS delay.
  The Choice: 2T, 3T
  DRAM Burst Length:
  The Choice: 4, 8
  DRAM Queue Depth:
  The Choice: 1 level, 2 level, 3 level
  DRAM Drive Srtength: Setup the DRAM’s driving current strength.
  The Choice: Auto, Manual
  DRAM Command Rate: Setup the timing at each cycle.
  The Choice: 1T command, 2T command
  DCLKI/O Timing:
  The Choice: 0ns, 0.5ns, 1ns, Auto
  Fast R-W Turn Around: This item controls the DRAM timing. It allows you to enable/disable teh fast/write turn around.
  The Choice: Enabled, Disabled
  Continuos DRAM Request:
  The Choice: Enabled, Disabled
  
  Ennek így már illendő lenne elindulnia...

Aktív témák