Aktív témák

• #4 RedAnt aktív tag shift+ő #1

  2005-09-29 02:10:53 #4

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  RedAnt

  aktív tag

  válasz shift+ő #1 üzenetére

  A sipolas alapjan a vga-nak van baja Bővebben: link
  
  Esetleg: (Bővebben: link)
  Make sure the monitor is working. A symptom of ''no video'' does not always indicate the system is dead. No video means absolutely no video display output of any kind at any time during startup. Most monitors have some form of diagnostic self-test capability built into them. Refer to the monitor owners manual for directions. Test the system to see if the problem is corrected, and continue to the next step if the problem is not corrected.
  
  
  Make sure the monitor is connected to the proper video connector. Some systems are equipped with 2 video connectors. Only 1 is enabled by default. Video output connectors are usually blue. Refer to the example below. Connector 1 is the video connector permanently connected to the system board. Connector 2 is the video adapter and, when installed, is the active video connection. Test the system to see if the problem is corrected, and continue to the next step if the problem is not corrected

Aktív témák