Új hozzászólás Aktív témák

• #5039 HSM félisten Acor #5037

  Új Válasz 2009-04-01 09:44:15 #5039

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  HSM

  félisten

  válasz Acor #5037 üzenetére

  Az nem alap, ha a ram nem 1066-on megy, mivel túlhúzod a proci uncore-ját, nem is kicsit.... (2133-->3200) Szóval ez is lehet a baj... UD4P lapod van... Hmmm...
  Lássunk egy template-et.

  Ez alap lesz, de először ennek kell mennie stabilan, innen lehet elindulni.

  BIOS Template - Gigabyte GA-EX58 - EXTREME MB Intelligent Tweaker (M.I.T.)

  CPU Clock Ratio [20x]

  Advanced CPU Features [Press Enter]:
  CPU Clock Ratio [20x]
  Intel(R) Turbo Boost Tech [Enabled]
  CPU Cores Enabled [All]
  CPU Multi Threading [Enabled]
  CPU Enhanced Halt (C1E) [Enabled]
  C3/C6/C7 State Support [Disabled]
  CPU Thermal Monitor [Enabled]
  CPU EIST Function [Enabled]
  Virtualization Technology [Enabled]
  Bi-Directional PROCHOT [Enabled]

  QPI Link Speed [36X]

  Uncore & QPI Features [Press Enter]:
  QPI Link Speed [36X]
  Uncore Speed [17X] (!!! Ha nem menne a 17, próbáld ki ide 16-al is!!!!!!)
  Isonchronous Frequency [Enabled]

  Base Clock (BCLK) Control [Disabled]
  BCLK Frequency (MHz) [133]

  Advanced Clock Control [Press Enter]:
  standard clock control
  Base Clock (BCLK) Control [Disabled]
  BCLK Frequency (MHz) [133]
  PCI Express Frequency (MHz) [Auto]
  C.I.A.2 [Disabled]

  advanced clock control
  CPU Clock Drive [ 800mV]
  PCI Express Clock Drive [ 900mV]
  CPU Clock Skew [ 0ps]
  IOH Clock Skew [ 0ps]

  Performance Enhance [Turbo]
  Extreme Memory Profile (X.M.P.) [Disabled]
  System Memory Multiplier (SPD) [Manual]
  DRAM Timing Selectable (sPD) [Manual]

  Channel A

  CAS Latency Time 8 [8]
  tRCD 8 [8]
  tRP 8 [8]
  tRAS 20 [22]
  Command rate 2 [2]

  Channel B

  CAS Latency Time 8 [8]
  tRCD 8 [8]
  tRP 8 [8]
  tRAS 20 [22]
  Command rate 2 [2]

  Channel C

  CAS Latency Time 8 [8]
  tRCD 8 [8]
  tRP 8 [8]
  tRAS 20 [22]
  Command rate 2 [2]

  Advanced DRAM Features [Press Enter]:
  Performance Enhance [Turbo]
  Extreme Memory Profile (X.M.P.) [Disabled]
  System Memory Multiplier (SPD) [Manual]
  DRAM Timing Selectable (sPD) [Manual]

  Channel A

  Channel A Timing Settings [Press Enter]:
  ##Channel A Standard Timing Control##
  CAS Latency Time 8 [8]
  tRCD 8 [8]
  tRP 8 [8]
  tRAS 20 [22]
  Command rate 2 [2]

  ##Channel A Advanced Timing Control##
  tRC 27 [AUTO]
  tRRD 4 [AUTO]
  tWTR 4 [AUTO]
  tWR 8 [AUTO]
  tRFC 60 [AUTO]
  tRTP 4 [AUTO]
  tFAW 20 [AUTO]
  Command Rate (CMD) 1 [AUTO]

  ##Channel A Misc Timing Control##
  Round Trip Latency 58 [AUTO]

  Channel A Turnaround Settings [Press Enter]:
  ##Channel A Writes Followed By Reads##
  Different DIMMs 6 [AUTO]
  Different Ranks 6 [AUTO]
  On The Same Rank 6 [AUTO]

  ##Channel A Reads Followed By Writes##
  Different DIMMs 8 [AUTO]
  Different Ranks 8 [AUTO]
  On The Same Rank 8 [AUTO]

  ##Channel A Reads Followed By Reads##
  Different DIMMs 6 [AUTO]
  Different Ranks 5 [AUTO]
  On The Same Rank 1 [AUTO]

  ##Channel A Writes Followed By Writes##
  Different DIMMs 6 [AUTO]
  Different Ranks 6 [AUTO]
  On The Same Rank 1 [AUTO]

  Channel B

  Channel B Timing Settings [Press Enter]:
  ##Channel B Standard Timing Control##
  CAS Latency Time 8 [8]
  tRCD 8 [8]
  tRP 8 [8]
  tRAS 20 [22]
  Command rate 2 [2]

  ##Channel B Advanced Timing Control##
  tRC 27 [AUTO]
  tRRD 4 [AUTO]
  tWTR 4 [AUTO]
  tWR 8 [AUTO]
  tRFC 60 [AUTO]
  tRTP 4 [AUTO]
  tFAW 20 [AUTO]
  Command Rate (CMD) 1 [AUTO]

  ##Channel B Misc Timing Control##
  Round Trip Latency 58 [AUTO]

  Channel A Turnaround Settings [Press Enter]:
  ##Channel B Writes Followed By Reads##
  Different DIMMs 6 [AUTO]
  Different Ranks 6 [AUTO]
  On The Same Rank 6 [AUTO]

  ##Channel B Reads Followed By Writes##
  Different DIMMs 8 [AUTO]
  Different Ranks 8 [AUTO]
  On The Same Rank 8 [AUTO]

  ##Channel B Reads Followed By Reads##
  Different DIMMs 6 [AUTO]
  Different Ranks 5 [AUTO]
  On The Same Rank 1 [AUTO]

  ##Channel B Writes Followed By Writes##
  Different DIMMs 6 [AUTO]
  Different Ranks 6 [AUTO]
  On The Same Rank 1 [AUTO]

  Channel C

  Channel C Timing Settings [Press Enter]:
  ##Channel C Standard Timing Control##
  CAS Latency Time 8 [8]
  tRCD 8 [8]
  tRP 8 [8]
  tRAS 20 [22]
  Command rate 2 [2]

  ##Channel C Advanced Timing Control##
  tRC 27 [AUTO]
  tRRD 4 [AUTO]
  tWTR 4 [AUTO]
  tWR 8 [AUTO]
  tRFC 60 [AUTO]
  tRTP 4 [AUTO]
  tFAW 20 [AUTO]
  Command Rate (CMD) 1 [AUTO]

  ##Channel C Misc Timing Control##
  Round Trip Latency 58 [AUTO]

  Channel C Turnaround Settings [Press Enter]:
  ##Channel C Writes Followed By Reads##
  Different DIMMs 6 [AUTO]
  Different Ranks 6 [AUTO]
  On The Same Rank 6 [AUTO]

  ##Channel C Reads Followed By Writes##
  Different DIMMs 8 [AUTO]
  Different Ranks 8 [AUTO]
  On The Same Rank 8 [AUTO]

  ##Channel C Reads Followed By Reads##
  Different DIMMs 6 [AUTO]
  Different Ranks 5 [AUTO]
  On The Same Rank 1 [AUTO]

  ##Channel C Writes Followed By Writes##
  Different DIMMs 6 [AUTO]
  Different Ranks 6 [AUTO]
  On The Same Rank 1 [AUTO]

  Load Line Calibration [Disabled]
  CPU Vcore 1.29375v [NORMAL]
  QPI/VTT Voltage 1.150v [NORMAL]
  IOH Core 1.100v [NORMAL]
  DRAM Voltage 1.5v [NORMAL]

  Advanced Voltage Control [Press Enter]:
  Load Line Calibration [Disabled]
  CPU Vcore 1.29375v [NORMAL]
  QPI/VTT Voltage 1.150v [NORMAL]
  IOH Core 1.100v [NORMAL]
  DRAM Voltage 1.5v [NORMAL]

  PCIE 1.500v [NORMAL]
  QPI PLL 1.100v [NORMAL]
  IOH Core 1.100v [NORMAL]
  ICH I/O 1.500v [NORMAL]
  ICH Core 1.1v [NORMAL]

  DRAM

  DRAM Voltage 1.500v [NORMAL]
  DRAM Termination 0.750v [NORMAL]
  Ch-A Data VRef. 0.750v [NORMAL]
  Ch-B Data VRef. 0.750v [NORMAL]
  Ch-C Data VRef. 0.750v [NORMAL]
  Ch-A Address VRef. 0.750v [NORMAL]
  Ch-B Address VRef. 0.750v [NORMAL]
  Ch-C Address VRef. 0.750v [NORMAL]

  És ha már végigírtam, ellenőrizd is le alaposan!

  [ Szerkesztve ]

Új hozzászólás Aktív témák