Keresés

Hirdetés

Új hozzászólás Aktív témák

  • ubyegon2

    nagyúr

    válasz Frawly #33181 üzenetére

    Itt a kimenet:

    (egyébként a Disks-nek a smart része vacak, de a sebesség ellenőrző része tökéletes)

    Ahogy látom, hiba az nincs rajta, az az 1-es értékű hibánál nem a Value - pedig de! ;)

    ubyegon@mint19c-HP-EliteBook-8570p:~$ sudo fdisk -l
    [sudo] ubyegon jelszava:
    Disk /dev/sda: 111,8 GiB, 120034123776 bytes, 234441648 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disklabel type: dos
    Disk identifier: 0x72ec28b3

    Eszköz Indítható Start Vége Szektorok Size Id Típus
    /dev/sda1 * 2048 41945407 41943360 20G 83 Linux
    /dev/sda2 41947136 234440703 192493568 91,8G 5 Kiterjesztett
    /dev/sda5 193478656 234440703 40962048 19,5G 83 Linux

    ubyegon@mint19c-HP-EliteBook-8570p:~$ sudo smartctl -a /dev/sda
    smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-33-generic] (local build)
    Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

    === START OF INFORMATION SECTION ===
    Device Model: KINGSTON SUV500120G
    Serial Number: 50026B7282050252
    LU WWN Device Id: 5 0026b7 282050252
    Firmware Version: 003056R6
    User Capacity: 120.034.123.776 bytes [120 GB]
    Sector Sizes: 512 bytes logical, 4096 bytes physical
    Rotation Rate: Solid State Device
    Form Factor: 2.5 inches
    Device is: Not in smartctl database [for details use: -P showall]
    ATA Version is: Unknown(0x0ffe), ATA8-ACS T13/1699-D revision 6
    SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
    Local Time is: Sat Sep 8 20:32:13 2018 CEST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 5) seconds.
    Offline data collection
    capabilities: (0x71) SMART execute Offline immediate.
    No Auto Offline data collection support.
    Suspend Offline collection upon new
    command.
    No Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 5) minutes.
    Conveyance self-test routine
    recommended polling time: ( 0) minutes.
    SCT capabilities: (0x003d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 48
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 1
    5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
    9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8
    100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 35704
    101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 9832
    170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
    171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
    172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
    174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3
    175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0
    176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0
    177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 52
    178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0
    180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 251
    183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
    187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0
    194 Temperature_Celsius 0x0022 039 100 000 Old_age Always - 39 (Min/Max 19/41)
    195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 1
    196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
    199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0
    201 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0
    204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 1
    231 Temperature_Celsius 0x0032 100 100 000 Old_age Always - 0
    233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 134
    234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 115
    241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 119
    242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 101
    250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 1

    SMART Error Log Version: 0
    No Errors Logged

    SMART Self-test log structure revision number 0
    Warning: ATA Specification requires self-test log structure revision number = 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Completed without error 00% 0 -
    # 2 Short offline Aborted by host 80% 0 -

    SMART Selective self-test log data structure revision number 0
    Note: revision number not 1 implies that no selective self-test has ever been run
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

    [ Szerkesztve ]

Új hozzászólás Aktív témák