Új hozzászólás Aktív témák

• #22481 Bobby81 tag

  Új Válasz 2012-02-09 21:09:14 #22481

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  Bobby81

  tag

  Sziasztok!

  Kellene 1 kis segítség...

  Próbálok soros porton csatlakozni a routeremhez, de a tpl parancsot nem tudom beütni és egy idő után leáll a betöltődés. Szerintetek mit lehet ezzel kezdeni? Miért nem tudom megszakítani a betöltést?

  U-Boot 1.1.4 (Apr 28 2011 - 15:55:09)

  AP83 (ar9100) U-boot 0.0.11
  DRAM:
  sri
  32 MB
  id read 0x100000ff
  flash size 8MB, sector count = 128
  Flash: 8 MB
  Using default environment

  In: serial
  Out: serial
  Err: serial
  Net: ag7100_enet_initialize...
  No valid address in Flash. Using fixed address
  : cfg1 0xf cfg2 0x7114
  eth0: 00:03:7f:09:0b:ad
  eth0 up
  eth0
  Autobooting in 1 seconds## Booting image at bf020000 ...
  Uncompressing Kernel Image ... OK

  Starting kernel ...

  Linux version 2.6.24.111 (root@dd-wrt) (gcc version 4.3.3 (GCC) ) #3413 Sat Aug 7 06:49:52 CEST 2010
  flash_size passed from bootloader = 8
  CPU revision is: 00019374
  booting platform Atheros AR9132 rev 2 (0xb9)
  Determined physical RAM map:
  memory: 02000000 @ 00000000 (usable)
  Built 1 zonelists in Zone order. Total pages: 8128
  Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
  Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
  Primary data cache 32kB, 4-way, linesize 32 bytes.
  Synthesized TLB refill handler (20 instructions).
  Synthesized TLB load handler fastpath (32 instructions).
  Synthesized TLB store handler fastpath (32 instructions).
  Synthesized TLB modify handler fastpath (31 instructions).
  Cache parity protection disabled
  PID hash table entries: 128 (order: 7, 512 bytes)
  Using 200.000 MHz high precision timer.
  Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  Memory: 29660k/32768k available (1991k kernel code, 3108k reserved, 312k data, 112k init, 0k highmem)
  Mount-cache hash table entries: 512
  NET: Registered protocol family 16
  Generic PHY: Registered new driver
  NET: Registered protocol family 2
  Time: MIPS clocksource has been installed.
  IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  TCP: Hash tables configured (established 1024 bind 1024)
  TCP reno registered
  gpio_proc: module loaded and /proc/gpio/ created
  AR7100 GPIOC major 0
  devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
  devfs: boot_options: 0x1
  squashfs: version 3.0 (2006/03/15) Phillip Lougher
  io scheduler noop registered
  io scheduler deadline registered (default)
  Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
  serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
  console [ttyS0] enabled
  PPP generic driver version 2.4.2
  PPP Deflate Compression module registered
  PPP BSD Compression module registered
  MPPE/MPPC encryption/compression module registered
  NET: Registered protocol family 24
  PPPoL2TP kernel driver, V1.0
  IMQ starting with 2 devices...
  IMQ driver loaded successfully.
  Hooking IMQ before NAT on PREROUTING.
  Hooking IMQ after NAT on POSTROUTING.
  tun: Universal TUN/TAP device driver, 1.6
  tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  guessed flashsize = 8M
  scanning for root partition
  tplink uboot detected
  bootloader size = 20000

  found squashfs at 160000
  Creating 8 MTD partitions on "ar7100-nor0":
  0x00000000-0x00020000 : "RedBoot"
  0x00020000-0x007e0000 : "linux"
  0x00160000-0x006f0000 : "rootfs"
  0x006f0000-0x007e0000 : "ddwrt"
  0x007e0000-0x007f0000 : "nvram"
  0x007f0000-0x00800000 : "FIS directory"
  0x007f0000-0x00800000 : "board_config"
  0x00000000-0x00800000 : "fullflash"
  Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
  GACT probability on
  Mirror/redirect action on
  Simple TC action Loaded
  u32 classifier
  Actions configured
  Netfilter messages via NETLINK v0.30.
  nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  ctnetlink v0.93: registering with nfnetlink.
  IPv4 over IPv4 tunneling driver
  GRE over IPv4 tunneling driver
  ip_tables: (C) 2000-2006 Netfilter Core Team
  IPP2P v0.8.2 loading
  ClusterIP Version 0.8 loaded successfully
  TCP bic registered
  TCP cubic registered
  TCP westwood registered
  TCP highspeed registered
  TCP hybla registered
  TCP htcp registered
  TCP vegas registered
  TCP scalable registered
  NET: Registered protocol family 1
  NET: Registered protocol family 17
  Welcome to PF_RING 3.2.1
  (C) 2004-06 L.Deri <deri@ntop.org>
  NET: Registered protocol family 27
  PF_RING: bucket length 128 bytes
  PF_RING: ring slots 4096
  PF_RING: sample rate 1 [1=no sampling]
  PF_RING: capture TX No [RX only]
  PF_RING: transparent mode Yes
  PF_RING initialized correctly.
  PF_RING: registered /proc/net/pf_ring/
  802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  All bugs added by David S. Miller <davem@redhat.com>
  decode 1f02
  VFS: Mounted root (squashfs filesystem) readonly.
  Mounted devfs on /dev
  Freeing unused kernel memory: 112k freed
  start service
  starting Architecture code for ap83
  load RTL Switch Driver
  Realtek RTL8366rb: Registered new driver
  Realtek RTL8366rb switch driver version 0.1.0
  rtl8366rb-smi rtl8366rb-smi: using GPIO pins 18 (SDA) and 19 (SCK)
  rtl8366rb-smi rtl8366rb-smi: RTL5937 ver. 3 chip found
  rtl8366-smi: probed
  rtl8366rb init vlan
  [0]phy_abilityAutoNegotiation : 1
  [0]phy_abilityHalf_10 : 1
  [0]phy_abilityFull_10 : 1
  [0]phy_abilityHalf_100 : 1
  [0]phy_abilityFull_100 : 1
  [0]phy_abilityFull_1000 : 1
  [0]phy_abilityFC : 1
  [0]phy_abilityAsyFC : 1
  [1]phy_abilityAutoNegotiation : 1
  [1]phy_abilityHalf_10 : 1
  [1]phy_abilityFull_10 : 1
  [1]phy_abilityHalf_100 : 1
  [1]phy_abilityFull_100 : 1
  [1]phy_abilityFull_1000 : 1
  [1]phy_abilityFC : 1
  [1]phy_abilityAsyFC : 1
  [2]phy_abilityAutoNegotiation : 1
  [2]phy_abilityHalf_10 : 1
  [2]phy_abilityFull_10 : 1
  [2]phy_abilityHalf_100 : 1
  [2]phy_abilityFull_100 : 1
  [2]phy_abilityFull_1000 : 1
  [2]phy_abilityFC : 1
  [2]phy_abilityAsyFC : 1
  [3]phy_abilityAutoNegotiation : 1
  [3]phy_abilityHalf_10 : 1
  [3]phy_abilityFull_10 : 1
  [3]phy_abilityHalf_100 : 1
  [3]phy_abilityFull_100 : 1
  [3]phy_abilityFull_1000 : 1
  [3]phy_abilityFC : 1
  [3]phy_abilityAsyFC : 1
  [4]phy_abilityAutoNegotiation : 1
  [4]phy_abilityHalf_10 : 1
  [4]phy_abilityFull_10 : 1
  [4]phy_abilityHalf_100 : 1
  [4]phy_abilityFull_100 : 1
  [4]phy_abilityFull_1000 : 1
  [4]phy_abilityFC : 1
  [4]phy_abilityAsyFC : 1
  rtl8366s_getEthernetPHY fail for 5!!!!
  rtl8366s_getEthernetPHY fail for 6!!!!
  rtl8366s_getEthernetPHY fail for 7!!!!
  rtl8366s_getEthernetPHY fail for 8!!!!
  rtl8366s_getEthernetPHY fail for 9!!!!
  rtl8366s_getEthernetPHY fail for 10!!!!
  rtl8366s_getEthernetPHY fail for 11!!!!
  rtl8366s_getEthernetPHY fail for 12!!!!
  rtl8366s_getEthernetPHY fail for 13!!!!
  rtl8366s_getEthernetPHY fail for 14!!!!
  rtl8366s_getEthernetPHY fail for 15!!!!
  load ATH Ethernet Driver
  ag7100_mod: module license 'unspecified' taints kernel.
  AG7100: Length per segment 1536
  AG7100: Max segments per packet 1
  AG7100: Max tx descriptor count 100
  AG7100: Max rx descriptor count 252
  AG7100: fifo cfg 3 00780008
  AG7100CHH: Mac address for unit 0
  AG7100CHH: ff:ff:ff:ff:ff:ff
  ag7100_mii: probed
  phymap is null
  usbcore: registered new interface driver usbfs
  usbcore: registered new interface driver hub
  usbcore: registered new device driver usb
  ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI controller
  ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1
  ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000
  ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  usb usb1: configuration #1 chosen from 1 choice
  hub 1-0:1.0: USB hub found
  hub 1-0:1.0: 1 port detected
  SCSI subsystem initialized
  sr_mod: Unknown symbol register_cdrom
  sr_mod: Unknown symbol cdrom_ioctl
  sr_mod: Unknown symbol cdrom_media_changed
  sr_mod: Unknown symbol cdrom_release
  sr_mod: Unknown symbol cdrom_open
  sr_mod: Unknown symbol unregister_cdrom
  sr_mod: Unknown symbol cdrom_number_of_slots
  Initializing USB Mass Storage driver...
  usbcore: registered new interface driver usb-storage
  USB Mass Storage support registered.
  configure eth0 to b0:48:7a:99:ed:d8
  ag7100_ring_alloc Allocated 1600 at 0x81c55800
  ag7100_ring_alloc Allocated 4032 at 0x81383000
  AG7100: cfg1 0x2f cfg2 0x7014
  AG7100: unit 0 phy is up...RGMii 1000Mbps full duplex
  AG7100: pll reg 0x18050014: 0x1a000000 AG7100: CPU PhaseLockLoop : 0x1050
  AG7100: Secondary PhaseLockLoop: 0x1032
  AG7100: Ethernet Internal Clock Control: 0x0
  AG7100: mii: 0x22
  AG7100: cfg1: 0x2f
  AG7100: cfg2: 0x7215
  AG7100: fcfg_0: 0x1d1f00
  AG7100: fcfg_1: 0x7ff0000
  AG7100: fcfg_2: 0xfff
  AG7100: fcfg_3: 0x7803ff
  AG7100: fcfg_4: 0xffff
  AG7100: fcfg_5: 0xfefef
  AG7100: done cfg2 0x7215 ifctl 0x0 miictrl 0x22
  AG7100: LAN Rx Hang Detected 1 times!
  Writing 4
  configure vlan1 to b0:48:7a:99:ed:d8
  configure vlan2 to B0:48:7A:99:ED9
  load ATH 802.11 a/b/g Driver
  load ATH 802.11n Driver
  ath_mimo_hal: 0.9.17.1 (AR5416, REGOPS_FUNC)
  ath_ahb: 0.9.4.5 (Atheros/multi-bss)
  ath_dfs: Version 2.0.0
  Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
  wlan: 0.8.4.2 (Atheros/multi-bss)
  wlan: mac acl policy registered
  ath_rate_atheros: Version 2.0.1
  Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
  ar5416CheckEepromDef: Read Magic = 0xFFFF
  EEPROM being read from flash @0xbfff1000
  need_swap = False.
  Howl Revision ID 0xb9
  dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0
  1Mbps 2Mbps 5.5Mbps 11Mbps
  1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
  1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
  1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
  wifi0: mac 20.0 phy 10.2 radio 13.0
  wifi0: Use hw queue 1 for WME_AC_BE traffic
  wifi0: Use hw queue 0 for WME_AC_BK traffic
  wifi0: Use hw queue 2 for WME_AC_VI traffic
  wifi0: Use hw queue 3 for WME_AC_VO traffic
  wifi0: Use hw queue 8 for CAB traffic
  wifi0: Use hw queue 9 for beacons
  wifi0: Use hw queue 7 for UAPSD
  wifi0: Atheros AR9100 WiSoC: mem=0xb80c0000, irq=2
  configure wifi0 to B0:48:7A:99:ED8
  [USB] checking...
  br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
  device br0 entered promiscuous mode
  device vlan1 entered promiscuous mode
  device eth0 entered promiscuous mode
  sh: ead: not found
  sh: can't create /proc/sys/dev/wifi0/pollingmode: nonexistent directory
  sh: can't create /proc/sys/dev/wifi0/maxvaps: nonexistent directory

  ath_numswbaperbc = 8(1)adj=76800
  ath0
  Invalid command : wdssep
  device ath0 entered promiscuous mode
  br0: port 2(ath0) entering learning state
  br0: port 1(vlan1) entering learning state
  device br0 left promiscuous mode
  device br0 entered promiscuous mode
  device br0 left promiscuous mode
  device br0 entered promiscuous mode
  Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
  bonding: MII link monitoring set to 100 ms
  device vlan2 entered promiscuous mode
  device vlan2 left promiscuous mode
  br0: topology change detected, propagating
  br0: port 2(ath0) entering forwarding state
  br0: topology change detected, propagating
  br0: port 1(vlan1) entering forwarding state
  SIOCGIFFLAGS: No such device
  SIOCGIFFLAGS: No such device
  SIOCGIFFLAGS: No such device
  SIOCGIFFLAGS: No such device
  etherip: Ethernet over IPv4 tunneling driver
  The Milkfish Router Services
  ERROR: Necessary service setting not found: milkfish_username - aborting.
  The Milkfish Router Services
  Restoring SIP ddsubscriber database from NVRAM...
  Empty.
  The Milkfish Router Services
  Restoring SIP ddaliases database from NVRAM...
  Empty.
  Freeing node: b0:48:7a:99:ed:d8
  ic->ic_cwm.cw_width :0, ic->ic_cwm.cw_extoffset: 0

Új hozzászólás Aktív témák