- antikomcsi: Való Világ: A piszkos 12 - VV12 - Való Világ 12
- ubyegon2: Airfryer XL XXL forrólevegős sütő gyakorlati tanácsok, ötletek, receptek
- Sub-ZeRo: Euro Truck Simulator 2 & American Truck Simulator 1 (esetleg 2 majd, ha lesz) :)
- gban: Ingyen kellene, de tegnapra
- Szevam: Érzelmi magabiztosság/biztonság - miért megyünk sokan külföldre valójában?
Hirdetés
-
A virágcsokor mellé hardvert is ajándékozhatunk anyák napján
ph A héten desktop PC-k, monitorok, gamer kiegészítők és házak vannak a kirakatban.
-
AMD Radeon undervolt/overclock
lo Minden egy hideg, téli estén kezdődött, mikor rájöttem, hogy már kicsit kevés az RTX2060...
-
iPaden is vége az App Store monopóliumának
ma Ősztől lehet alternatív alkalmazásboltból telepíteni az EU tagállamaiban.
-
Mobilarena
ASUS WL-500G Premium
Új hozzászólás Aktív témák
-
meone
tag
Sziasztok
Lehet hogy nagyon hűlyekérdésem.
Azt hallotam hogy ez a router tudja emulálni a MAC címet és statikus IP-t egyszerre.
Nekem úgy kéne hogy egyszerrre mac-oljon és a statikus ip-t mutasson a szolgáltató felé.
Tudom hogy ezek alapfunkciók.
De nekem egyszerre kéne olyan legyen mintha a sajátgép menne kifelé.
Amúgy mennyibe kerűl?
Köszi szépen.
Bocsi hogy fárasztottalak beneteket.Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
Sziasztok.
Elnézést, hogy ilyen értelmetlenkedő kérdésekkel jövök.A segítségetekre volna szükségem.
Ma vettem egy Wl-500gp v2-es routeret gyári firmware-rel.
Az alap feladatokat tökéletesen ellátja, de ami miatt vettem arra jelenleg nem alkalmas.Eredetileg nekem vezeték nélküli a netem.
Azt szeretném meg tudni, hogy ezt a Routert, hogy lehet úgy felkonfigurálni, hogy át vegye a gépemben lévő WiFi-s kártya szerepét, tehát a router kapja a netet és onan osztja le nekem.
Az OLEG -es FW-t akarom én is fel rakni az is gondolom támogatja a WiFi-s netet.
Mit kell ahhoz be írni akár telneten keresztül parancs sorban, hogy el lássa a funkciót.Ezeket kéne be állítani vele:
SSID: wnet17
Csatorna: 11
Statikus: IP-van.
MAC címet meg emuláltatni kéne.És végül milyen Torrentklienst javasoltok illetve ehhez valami Webes felületet is ahol menedzselni lehet ezt.
Ha van hozzá valami tutoriál féle azt is meg köszönném, hogy hogyis kell a torrentklienst fel rakni meg a Webes menedzselő felületet.
Azért, hogy ne kelljen itt minden aprósággal zavarnom titeket.Segítségeteket köszönöm szépen előre is.
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #4971 üzenetére
Szia
megnéztem a beállítást azzal nem működik.
Addig meg nem akarom le cserélni OLEGre míg nem működik így!Vagy ha kicserélem akkor az újjal működnifog?
Azt viszont tapasztaltam, hogy itt alapból a gyárin nincsen Telnet engedélyezés,
tehát az csak az FW csere után lesz aktív ha jól értelmezem a dolgokat ugye?Esetleg máféle konfigos meg oldás van a problémámra amúgy?
Köszi a segítséget amúgy.
[ Szerkesztve ]
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #4977 üzenetére
Köszi szépen.
Akkor várok.Ahogy így olvasom és jól értelmezem, ha az OLEGet fel teszem utánna vissza
lehet még tolni a gyárit is ugye?Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #4985 üzenetére
Kis bajom akadt az FW feltöltésével.
csak a WL500gpv2-1.9.2.7-10.trx fájlt töltöm fel és akárhányszot tolom fel
mindig ez lesz a vége:
Firmware upgrade fail. It may result from incorrect image or error transmission. Please check the version of firmare and try again.
Mi a teendőm?Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #4988 üzenetére
Mindent kilőttem csak ez volt rajta aktív de így se met mindenhogy próbáltam tüzfalat kilőttem, antivirus is kivólt. Az IP-t be álítottam ahogy mondtad minden alapon volt.
De még mindig semmi nincsen. ugyan azt írja ki.
A FW restoration meg azt mondja nem találja keresi vagy 30 mp-ig de semmi úgy hogy nem tudom.Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #4990 üzenetére
Igen most már tudom. Még egy valami nemvilágos.
Hogy kell be álítani hogy legyen netem?
Angolul itt van azt meg találtam.
- system setup / operation mode / access point
- wireless uses client configuration with Netgear SSID / WPA2-TKIP
- Wireless / advanced uses ethernet bridge
- ip config is fixed, using 192.168.1.150 / gw 192.168.1.125 (netgear)
- dns is 192.168.1.125 (netgear)
Ez csak egy példa.
Nem nagyon világos nekem mit meg, hogy kell csinálni.
Nem vagyok valami jó angolos.
Az FW-t sikeresen feltöltöttem.
B.U.É.K. mindenkinek[ Szerkesztve ]
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #4992 üzenetére
Szia meg oldottam végül is.
Akkor itt ki si felytem, hogy hogy kell.Wireless - Interface
Az AP SSID-je pl.: wnet17
csatorna az ami az AP-nak van pl.:11Wireless - Advanced
Extended Mode:Ethernet Bridge ezt kell kiválasztani.IP Config - WAN & LAN
WAN Connection Type:StatikusIP (de gondolom ezt sejtetük)
A szolgáltató által adott IP-ket kell be írni.IP Config - WAN & LAN/LAN IP Setting
Host Name: az eddigi kártya MAC címe pl.:00134617F595
Azallata lévő két beállítás maradhat alapon.Ha minden jól megy Ezt kell látni a logg ban: pl.:
Status & Log - 11g Interface:
Mode : Ethernet Bridge
Channel : 11
Status : Connected to wnet17
AP : 00:02:6f:40:9e:a3
Signal : -59 dBmHa minden jól megy akkor van net ezután.
Köszönöm szépen mindenkinek aki segített.[ Szerkesztve ]
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #4995 üzenetére
Üdv újból.
Sikeresen eljutottam a rtorrent feltelepítéséig és itt meg akadtam.
[link]
egészen pontosan ennél a résznél:
rtorrent.conf
Ezt Hol lehet el érni?
Vagy mibe kell beletenni?A lighttpd.conf ugyan ez a problémám.
Ezt a sort is VI-ban kell hozzáadni? mod_scgiEnnek is mi a pontos elérési útja?
Köszi a segítséget előre is.Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz ecaddict #4998 üzenetére
Megint meg akadtam.
VI-al meg nyitottam a lighttpd.conf, de nem volt benne semmi.
Lehet valamit én álítottam el vagy nem tudom.
A server.moduleshez szereném hozzá adni a mod_scgi sort, hogy működjön a torrent.[ Szerkesztve ]
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5005 üzenetére
Igen néztem is, hogy egy tök üres fájlt hozott létre de akkor elég enyit be írni, hogy
server.modules = (mod_scgi), és a végére meg be tenni ezt:scgi.server = ( "/RPC2" => ( "127.0.0.1" => ( "host" => "127.0.0.1", "port" => 5000, "check-local" => "disable")))
Ha ezt a két sort beleírom akkor elvileg működik vagy kell még valamit csinálni?
Mivel a tutorialban ami bevan linkelve kép azon több sor is van csak aért bizonytalanodtam el.Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5007 üzenetére
Úgy csináltam ahogy írva van de kihagytam a 6. fejezetett.
Azért üres ezekszerint a fájl.
Esetleg ha kitöltöm ezt a fájlt teljesen amit belekell írni,
akkor működni fog vagy térjek vissza a 6. fejezethez?[ Szerkesztve ]
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5009 üzenetére
Máris gurítom végig az 5. fejezetet.
Amúgy hova javallot tenni a logokat?
Amit a Samba csinál.Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5012 üzenetére
Ugye php-s scriptet így kell az 5. fejezet végén megcsinálni:
vi /opt/etc/samba/Share/www
A tartalma meg a következő:<?php
phpinfo();
?>[ Szerkesztve ]
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5015 üzenetére
Nem tudom miért a fájlt azt meg csinálja el is menti,
de nem hozza be, ha be akarom hozni weben.Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5019 üzenetére
Megnéztem reboot után nem indúl el.
Ki adtam a "ps -ax"-et
Minden ugyan úgy csináltam pedig mint a le írásban van.
Az alapot azt ki adja. De reboot után nem indúl a lighttpd.
Erro logot, hogy tudok olvasni mert inen nem nagyon tudom elérni a megosztott mapákat pedig azt is be álítottam 777-re.[ Szerkesztve ]
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5022 üzenetére
Nem indúl el. Ezt írja ki.
Duplicate config variable in conditional 0 global: fastcgi.server
2009-01-01 21:53:07: (configfile.c.888) source: cat /opt/etc/lighttpd/conf.d/*.conf line: 15 pos: 1 parser failed somehow near here: (EOL)
2009-01-01 21:53:07: (configfile.c.888) source: /opt/etc/lighttpd/lighttpd.conf line: 335 pos: 12 parser failed somehow near here: (EOL)Error logot, hogy lehe olvasni?
[ Szerkesztve ]
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5025 üzenetére
Fogom és újra konfigurálom a particiók leformázásától hátha az segít rajta.
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
Megint meg akadtam a lighttpd nem akar elundúlni sehogysem.
Ezt írja ki:[root@001346178395 root]$ /opt/etc/init.d/S80lighttpd start
Starting web server: lighttpd
[root@001346178395 root]$ /opt/bin/php-fcgi: can't load library 'libiconv.so.2'
/opt/bin/php-fcgi: can't load library 'libiconv.so.2'
2009-01-01 23:37:28: (mod_fastcgi.c.1025) the fastcgi-backend /opt/bin/php-fcgi failed to start:
2009-01-01 23:37:28: (mod_fastcgi.c.1029) child exited with status 16 /opt/bin/php-fcgi
2009-01-01 23:37:28: (mod_fastcgi.c.1032) If you're trying to run PHP as a FastCGI backend, make sure you're using the FastCGI-enabled version.
You can find out if it is the right one by executing 'php -v' and it should display '(cgi-fcgi)' in the output, NOT '(cgi)' NOR '(cli)'.
For more information, check http://trac.lighttpd.net/trac/wiki/Docs%3AModFastCGI#preparing-php-as-a-fastcgi-programIf this is PHP on Gentoo, add 'fastcgi' to the USE flags.
2009-01-01 23:37:28: (mod_fastcgi.c.1336) [ERROR]: spawning fcgi failed.
2009-01-01 23:37:28: (server.c.895) Configuration of plugins failed. Going down.
php
php: can't load library 'libiconv.so.2'Már nem tudom mit tegyek.
Hálózaton hogy lehet elérni a Samba-s mapákat?Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
Mindent fel telepítek és utánna is ezt adja ki. a 6.fejezetett azt kihagytam eddig.
Miután reebootol utánna dobja fel ezt a hibát.
A ps -ax paracs után már meg se jelenik a lighttpd a futóproceszek listályában.
Mit tegyek?Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5031 üzenetére
Anyit változtattam a dolgon hogy beraktam post-boot -ba így el indul de az rtorrent még mindig nem akar indulni.
Kiadtam neki ezt a parancsot:/opt/etc/init.d/S99rtorrent
[: RTORRENT_DEFAULT: unknown operand
[: RTORRENT_DEFAULT: unknown operand
[: RTORRENT_DEFAULT: unknown operand
/opt/etc/init.d/S99rtorrent: /opt/etc/init.d/S99rtorrent: 84: Syntax error: "&" unexpectedHa meg belenyúlok a lighttpd confba ezt látom amit át írtam meg szünik és upgrade után ez lesz.:
#### fastcgi module
## read fastcgi.txt for more info
#fastcgi.server = ( ".php" =>
# ( "localhost" =>
# (
# "socket" => "/tmp/php-fastcgi.socke",
# "bin-path" => "/opt/bin/php-fcgi"
# "bin-environment" => (
# "PHP_FCGI_MAX_REQUESTS" => "4000"
# )
# )
# )
# )Ha kiveszem a # -eket akkkor meg kilőki hogy dupla indítás.
Az eredeti elérési utakat adtam meg amúgy upgrade után is.
Úgyhogy nem tudom mi a baja.
Valakinek valamiféle ötlet mit kel még be állítani?Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
Ahogy az a 7. fejezetben van be másoltam mindent.
Akkor csak ezt adja ki hibának:
opt/etc/init.d/S99rtorrent: /opt/etc/init.d/S99rtorrent: 84: Syntax error: "&" unexpected
Ha kiszedem az össze ilyen karaktert akkor meg nem fut rendesen a torrent.
Restart után is fut a lighttpd fordítja is a php-t de még mindig nem jó.
Kezdem már az egészet unni vajon hol ronthatom el?
Az 5. fejezetig teljesen jó minden csak itt nem működik a végén.A 6. fejezet elején lefutó parancsokra mit kell válaszolni?
Megkérdezi, hogy felül írhatja e az ipkg.confot meg a lighttpd mind a 2 szer igennel szoktam válaszolni. Ezt követően nem nagyon akart működni az rtorrent.Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5039 üzenetére
Na nagy nehezen el jutottam addig hogy el indúl az rtorrent de van 2 problémája.
Az egyik ez:Starting rtorrent: rtorrent/opt/var/run/utmp: No such file or directory
A 2. pedig az, hogy nem tudja olvasni az rc.conf-ját.Valami orvoslatrá?
Mi álítcsak be és hol?Ha kiadom a ps -ax paracsot enyit látok a többiközött.
upnp -D -L br0 -W eth1
206 ? Ss 0:00 SCREEN -S -X screen rtorrent
208 pts/2 Ss+ 0:00 rtorrent[ Szerkesztve ]
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
Sikerült a másik parancsot is ki másolnom ezt is sérelmezi még:
(21:06:18) Using 'select' based polling.
(21:06:18) Could not read resource file: ~/.rtorrent.rcMég mindig csak paracssorba lehet futattni nem megy a grafikus felülete.
Valakinek ötelet van, hogy az utolsó 2 hozzászólásomra mi a megoldás?
[1. probléma]
[2.probléma][ Szerkesztve ]
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz siemensfun #5049 üzenetére
Már majd nem jó.
Ha reboot után kiadom neki ezt a parncsot:
/opt/etc/init.d/S99rtorrent
A válasz a következő:Usage: {start|stop|restart|force-reload}
Ha úgy adom ki a paracsot neki hogy ez a sor is benne van:
SCRIPTNAME=/etc/init.d/$NAME
Akkor meg ez a válasz:Usage: /etc/init.d/rtorrent {start|stop|restart|force-reload}
A beálításokat ez alapján csináltam:[link]
Valami meg oldás?
Mit vegyek ki a konfigból vagy tegyek hozzá?Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz yamshee #5053 üzenetére
Kiadtam 2 féle képpen is parancsot ime az eredmény:
[root@001346178395 root]$ /opt/etc/init.d/S99rtorrent
Usage: /etc/init.d/rtorrent {start|stop|restart|force-reload}
[root@001346178395 root]$ /opt/etc/init.d/S99rtorrent start
Starting rtorrent: rtorrent.Ezek után kiadtam a ps-ax parancsot ereménye:
PID TTY STAT TIME COMMAND
1 ? S 0:01 /sbin/init
2 ? S 0:00 [keventd]
3 ? SN 0:00 [ksoftirqd_CPU0]
4 ? S 0:00 [kswapd]
5 ? S 0:00 [bdflush]
6 ? S 0:00 [kupdated]
7 ? S 0:00 [mtdblockd]
61 ? S 0:00 telnetd
62 ? S 0:00 httpd eth1
68 ? S 0:00 [dnsmasq]
69 ? S 0:00 syslogd -m 0 -O /tmp/syslog.log -S -l 7
70 ? S 0:00 klogd
75 ? S 0:00 [khubd]
83 ? Ss 0:00 lpd
85 ? Ss 0:00 p9100d -f /dev/usb/lp0 0
89 ? Ss 0:00 waveservermain
91 ? Ss 0:00 rcamdmain
95 ? S 0:00 [usb-storage-0]
96 ? S 0:00 [scsi_eh_0]
108 ? Ss 0:00 infosvr br0
109 ? Ss 0:00 watchdog
112 ? Ss 0:00 ntp
118 ? S 0:00 [kjournald]
124 ? S 0:00 dropbear
134 ? Ss 0:00 /usr/sbin/smbd -D -l /opt/var/log/smbd.log -s /opt/et
136 ? Ss 0:00 /usr/sbin/nmbd -D -n ASUS -o -l /tmp -s /opt/etc/samb
150 ? S 0:00 [kjournald]
158 ? S 0:00 /opt/sbin/lighttpd -f /opt/etc/lighttpd/lighttpd.conf
159 ? Ss 0:00 /opt/bin/php-fcgi
160 ? Ss 0:00 /opt/bin/php-fcgi
161 ? Ss 0:00 /opt/bin/php-fcgi
162 ? Ss 0:00 /opt/bin/php-fcgi
163 ? S 0:00 /opt/bin/php-fcgi
164 ? S 0:00 /opt/bin/php-fcgi
165 ? S 0:00 /opt/bin/php-fcgi
166 ? S 0:00 /opt/bin/php-fcgi
234 ? S 0:00 upnp -D -L br0 -W eth1
236 ? Ss 0:01 dropbear
237 pts/0 Ss 0:00 -sh
275 pts/0 R+ 0:00 ps -axAz S99rtorrent konfigfájlja pedig a következő:
user="root"
# the system group to run as, not implemented, see d_start for beginning implementation
# group=`id -ng "$user"`
#prefix="/opt"
config="/opt/etc/rtorrent.conf"
# the full path to the filename where you store your rtorrent configuration
#if [ ${dirlayout} = RTORRENT_DEFAULT ] ; then
# config="${prefix}/home/${user}/.rtorrent.rc"
#else
##config="/opt/etc/rtorrent.conf"
#fi
options="-n -o import=${config}"
# set of options to run with
#if [ ${dirlayout} = RTORRENT_DEFAULT ] ; then
# options=""
#else
## OPTIONS="-n -o import=${config}"
#fi
# default directory for screen, needs to be an absolute path
#if [ ${dirlayout} = RTORRENT_DEFAULT ] ; then
# base="${prefix}/home/${user}"
#else
## BASE="/opt/etc/samba/Share/torrent"
#fi
base="/opt/etc/samba/Share/torrent"
# name of screen session
##SRNAME=rtorrent
srnname="rtorrent"
# file to log to (makes for easier debugging if something goes wrong)
##logfile="/opt/var/log/rtorrentInit.log"
logfile="/opt/etc/samba/Share/download/torrentInit.log"
PATH=/opt/bin:/opt/sbin:/usr/bin:/sbin:/bin:/usr/sbin
DESC="rtorrent"
NAME=rtorrent
DAEMON=$NAME
SCRIPTNAME=/etc/init.d/$NAME
# Do not proceed unless some apps are available.
test -x /opt/bin/screen || ( echo "screen not found." | tee -a "$logfile" >&2 ; exit 2 )
test -x /opt/bin/su -o -x /bin/su || ( echo "su not found." | tee -a "$logfile" >&2 ; exit 2 )
##test -x /opt/bin/screen || ( echo "screen not found." | tee -a "$logfile" >&2 ; exit 2 )
checkcnfg() {
exists=0
for i in `echo "$PATH" | tr ':' '\n'` ; do
if [ -f $i/$NAME ] ; then
exists=1
break
fi
done
if [ $exists -eq 0 ] ; then
echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" >&2
##echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" >&2
exit 3
fi
if ! [ -r "${config}" ] ; then
echo "cannot find readable config ${config}. check that it is there and permissio
##echo "cannot find readable config ${config}. check that it is there and permissions are appropr
exit 3
fi
}
d_start() {
[ -d "${base}" ] && cd "${base}"
stty stop undef && stty start undef
su -c "screen -ls | grep -sq "\.${srname}[[:space:]]" " ${user} || su -c "screen -dm -S ${srnam
## this works for the screen command, but starting rtorrent below adopts screen session gid
## even if it is not the screen session we started (e.g. running under an undesirable gid
# su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "sg \"$group\" -c \"
su -c "screen -S "${srnname}" -X screen rtorrent ${options} 2>&1 1>/dev/null" ${user} | tee -a "
}
d_stop() {
session=`getsession "$config"`
if ! [ -s ${session}/rtorrent.lock ] ; then
return
fi
pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9]//g"`
if ps-A | grep -sq ${pid}.*rtorrent ; then # if ps -A | grep -sq ${pid}.*rtorrent ; th
kill -s INT ${pid}
fi
}
getsession() {
session=`awk '/^[[:space:]]*session[[:space:]]*=[[:space:]]*/{print($3)}' "$config"`
echo $session
}
##getprange() {
##ports=`awk '/^[[:space:]]*port_range[[:space:]]*=[[:space:]]*/{print($3)}' "$config" | sed "s/-
#echo $ports
#}
##
#getdhtport() {
##dht_port=`awk '/^[[:space:]]*dht_port[[:space:]]*=[[:space:]]*/{print($3)}' "$config"`
##echo $dht_port
##}
## fwopen() {
# DHT_PORT=`getdhtport "$config"`
# iptables -D INPUT -j DROP
# PORTS=$(seq `getprange "$config"`)
# for P in $PORTS; do
# iptables -I INPUT -i vlan1 -p tcp --syn --dport $P -j ACCEPT
# done
# if [ $DHT_PORT ]; then
# iptables -I INPUT -i vlan1 -p tcp --dport $DHT_PORT -j ACCEPT
# fi
# iptables -A INPUT -j DROP
# }
# fwclose() {
# DHT_PORT=`getdhtport "$config"`
# PORTS=$(seq `getprange "$config"`)
# for P in $PORTS; do
# iptables -D INPUT -i vlan1 -p tcp --syn --dport $P -j ACCEPT
# done
# if [ $DHT_PORT ]; then
# iptables -D INPUT -i vlan1 -p tcp --dport $DHT_PORT -j ACCEPT
# fi
# }
#d_start() {
#[ -d "${BASE}" ] && cd "${BASE}"
#fwopen
#stty stop undef && stty start undef
#screen -ls | grep .$SRNAME[[:space:]] > /dev/null || \screen -dm -S ${SRNAME}
#screen -S ${SRNAME} -X screen rtorrent ${OPTIONS} 2>&1 1>/dev/null | tee -a "$logfile"
#}
#d_stop() {
#fwclose
#session=`getsession "$config"`
#if ! [ -s ${session}/rtorrent.lock ] ; then
#return
#fi
#pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9]//g"`
#if ps -A | grep -sq ${pid}.*rtorrent ; then # make sure the pid doesn't belong to another proces
#kill -s INT ${pid}
#fi
#}
checkcnfg
case "$1" in
start)
echo -n "Starting $DESC: $NAME"
d_start
echo "."
;;
stop)
echo -n "Stopping $DESC: $NAME"
d_stop
echo "."
;;
restart|force-reload)
echo -n "Restarting $DESC: $NAME"
d_stop
sleep 1
d_start
echo "."
;;
*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
#echo "Usage: $0 {start|stop|restart|force-reload}" >&2
exit 1
;;
esac
exit 0Valakinek valami ötlete mi a hibám?
Mit kellen esetleg beletenni még vagy mit vegyek ki?Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
Azt a hibát kijavítottam.
Most ez a problémálya:
[root@001346178395 root]$ /opt/etc/init.d/S99rtorrent start
Starting rtorrent: rtorrent/opt/var/run/utmp: No such file or directory
[screen is terminating]
.Most hozzak létre egy könyvtárat neki vagy valami mást hiányól?
A Máik még mindig fenn áll.
Valahol máshol is baja van.
Bocsánat hogy íly puritánul belöktem a kódot.[root@001346178395 root]$ /opt/etc/init.d/S99rtorrent
Usage: /etc/init.d/rtorrent {start|stop|restart|force-reload}Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5067 üzenetére
Megpróbáltam mikor kiadtam neki futatásba a parancsot utánna belépet és nem csinált utánna már semmit, kilépni nem tudtam belőlle.
Úgy hogy maradok az előzőverziónál.Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
S99 konfigja:
#!/bin/sh
user="root"
#prefix="/opt"
config="/opt/etc/rtorrent.conf"
options="-n -o import=${config}"
base="/opt/etc/samba/Share/torrent"
srname="rtorrent"
logfile="/opt/etc/samba/Share/download/torrentInit.log"
PATH=/opt/bin:/opt/sbin:/usr/bin:/sbin:/bin:/usr/sbin
DESC="rtorrent"
NAME=rtorrent
DAEMON=$NAME
SCRIPTNAME=/etc/init.d/$NAME
# Do not proceed unless some apps are available.
test -x /opt/bin/screen || ( echo "screen not found." | tee -a "$logfile" >&2 ; exit 2 )
test -x /opt/bin/su -o -x /bin/su || ( echo "su not found." | tee -a "$logfile" >&2 ; exit 2
)
checkcnfg() {
exists=0
for i in `echo "$PATH" | tr ':' '\n'` ; do
if [ -f $i/$NAME ] ; then
exists=1
break
fi
done
if [ $exists -eq 0 ] ; then
echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" >&2
exit 3
fi
if ! [ -r "${config}" ] ; then
echo "cannot find readable config ${config}. check that it is there and permissio
exit 3
fi
session=`getsession "$config"`
if ! [ -d "${session}" ] ; then
echo "cannot find readable session directory ${session} from config ${config}. ch
exit 3
fi
}
d_start() {
[ -d "${base}" ] && cd "${base}"
stty stop undef && stty start undef
su -c "screen -ls | grep -sq "\.${srname}[[:space:]]" " ${user} || su -c "screen -dm -S ${s
## this works for the screen command, but starting rtorrent below adopts screen session gid
## even if it is not the screen session we started (e.g. running under an undesirable gid
su -c "screen -S "${srnname}" -X screen rtorrent ${options} 2>&1 1>/dev/null" ${user} | tee -a
}
d_stop() {
session=`getsession "$config"`
if ! [ -s ${session}/rtorrent.lock ] ; then
return
fi
pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9]//g"`
if ps-A | grep -sq ${pid}.*rtorrent ; then # if ps -A | grep -sq ${pid}.*rtorrent ; th
kill -s INT ${pid}
fi
}
getsession() {
session=`awk '/^[[:space:]]*session[[:space:]]*=[[:space:]]*/{print($3)}' "$config"`
echo $sesion
}
checkcnfg
case "$1" in
start)
echo -n "Starting $DESC: $NAME"
d_start
echo "."
;;
stop)
echo -n "Stopping $DESC: $NAME"
d_stop
echo "."
;;
restart|force-reload)
echo -n "Restarting $DESC: $NAME"
d_stop
sleep 1
d_start
echo "."
;;
*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
exit 1
;;
esac
exit 0rtorrent.conf:
# Minumum amount of peers to connect per torrent, if available.
min_peers = 20
# Minumum amount of peers to connect per torrent.
max_peers = 40
# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 20
# Maximum number of simultanious uploads per torrent.
max_uploads = 5
# Global download rate in KiB. "0" for unlimited.
download_rate = 0
# Global upload rate in KiB. "0" for unlimited.
upload_rate = 0
# Default directory to save downloaded files. Note it doesn't support
# space yet.
directory = /opt/etc/samba/Share/torrent/work/
# Watch a directory for new torrents, and stop those that have been deleted.
#schedule = watch_directory,5,5,load_start=/opt/etc/samba/Share/torrent/dl/*.torrent
#schedule = untied_directory,5,5,stop_untied=
# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=10M
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /opt/etc/samba/Share/torrent/session
# The ip address reported to the tracker.
#ip = rakshasa
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = rakshasa
# Port range to use for listening.
port_range = 51777-51780
# Start opening ports at a random position within the port range.
#port_random = no
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = no
# Set whetever the client should try to connect to UDP trackers.
#use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 128
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,"stop_on_ratio=200,200M,2000"
#schedule = ratio,30,60,stop_on_ratio=200
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry,
prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,enable_retry,prefer_plaintext
# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
# dht = auto
# UDP port to use for DHT.
#
# dht_port = 6881
# Enable peer exchange (for torrents not marked private)
#
# peer_exchange = yes
#
# Do not modify the following parameters unless you know what you're doing.
#
scgi_port = 127.0.0.1:5000Itt van mind a kettő.
Nem tudom mi a hiba?Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
Újból sikerült kijavítanom pár hibát.
A rendszernek ez a része már 95%-ban múködik.A kód jelenleg így nézki:
#!/bin/sh
user="root"
config="/opt/etc/rtorrent.conf"
options="-n -o import=${config}"
base="/opt/etc/samba/Share/torrent"
srname="rtorrent"
logfile="/opt/etc/samba/Share/download/torrentInit.log"
PATH=/opt/bin:/opt/sbin:/usr/bin:/sbin:/bin:/usr/sbin
DESC="rtorrent"
NAME=rtorrent
DAEMON=$NAME
SCRIPTNAME=/etc/init.d/$NAME
test -x /opt/bin/screen || ( echo "screen not found." | tee -a "$logfile" >&2 ; exit 2 )
test -x /opt/bin/su -o -x /bin/su || ( echo "su not found." | tee -a "$logfile" >&2 ; exit 2 )
)
checkcnfg() {
exists=0
for i in `echo "$PATH" | tr ':' '\n'` ; do
if [ -f $i/$NAME ] ; then
exists=1
break
fi
done
if [ $exists -eq 0 ] ; then
echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" >&2
exit 3
fi
if ! [ -r "${config}" ] ; then
echo "cannot find readable config ${config}. check that it is there and permissions are appropriate" | tee -a "$logfile" >&2
exit 3
fi
session=`getsession "$config"`
if ! [ -d "${session}" ] ; then
echo "cannot find readable session directory ${session} from config ${config}. check permissions" | tee -a "$logfile" >&2
exit 3
fi
}
getsession() {
session=`awk '/^[[:space:]]*session[[:space:]]*=[[:space:]]*/{print($3)}' "$config"`
echo $session
}
getprange() {
ports=`awk '/^[[:space:]]*port_range[[:space:]]*=[[:space:]]*/{print($3)}' "$config" | sed "s/-/ /"`
echo $ports
}
getdhtport() {
dht_port=`awk '/^[[:space:]]*dht_port[[:space:]]*=[[:space:]]*/{print($3)}' "$config"`
echo $dht_port
}
fwopen() {
DHT_PORT=`getdhtport "$config"`
iptables -D INPUT -j DROP
PORTS=$(seq `getprange "$config"`)
for P in $PORTS; do
iptables -I INPUT -i vlan1 -p tcp --syn --dport $P -j ACCEPT
done
if [ $DHT_PORT ]; then
iptables -I INPUT -i vlan1 -p tcp --dport $DHT_PORT -j ACCEPT
fi
iptables -A INPUT -j DROP
}
fwclose() {
DHT_PORT=`getdhtport "$config"`
PORTS=$(seq `getprange "$config"`)
for P in $PORTS; do
iptables -D INPUT -i vlan1 -p tcp --syn --dport $P -j ACCEPT
done
if [ $DHT_PORT ]; then
iptables -D INPUT -i vlan1 -p tcp --dport $DHT_PORT -j ACCEPT
fi
}
d_start() {
[ -d "${BASE}" ] && cd "${BASE}"
fwopen
stty stop undef && stty start undef
screen -ls | grep .$SRNAME[[:space:]] > /dev/null || \screen -dm -S ${SRNAME}
screen -S ${SRNAME} -X screen rtorrent ${OPTIONS} 2>&1 1>/dev/null | tee -a "$logfile" >&2
}
d_stop() {
fwclose
session=`getsession "$config"`
if ! [ -s ${session}/rtorrent.lock ] ; then
return
fi
pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9]//g"`
if ps -A | grep -sq ${pid}.*rtorrent ; then # make sure the pid doesn't belong to another process
kill -s INT ${pid}
fi
}
checkcnfg
case "$1" in
start)
echo -n "Starting $DESC: $NAME"
d_start
echo "."
;;
stop)
echo -n "Stopping $DESC: $NAME"
d_stop
echo "."
;;
restart|force-reload)
echo -n "Restarting $DESC: $NAME"
d_stop
sleep 1
d_start
echo "."
;;
*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
#echo "Usage: $0 {start|stop|restart|force-reload}" >&2
exit 1
;;
esac
exit 0Ha kiadom a parancsot egyszerűen akkor ezt jön vissza:
[root@001346178395 root]$ /opt/etc/init.d/S99rtorrent
Usage: /etc/init.d/rtorrent {start|stop|restart|force-reload}Ha startal adom ki a parancsot akkor meg ez az eredménye:
[root@001346178395 root]$ /opt/etc/init.d/S99rtorrent start
Starting rtorrent: rtorrent/opt/etc/init.d/S99rtorrent: /opt/etc/init.d/S99rtorrent: 226: gt: not found
/opt/etc/init.d/S99rtorrent: /opt/etc/init.d/S99rtorrent: 226: /dev/null: Permission denied
No Sockets found in /tmp/screens/S-root.
Use: screen [-opts] [cmd [args]]
or: screen -r [host.tty]
Options:
-a Force all capabilities into each window's termcap.
-A -[r|R] Adapt all windows to the new display width & height.
-c file Read configuration file instead of '.screenrc'.
-d (-r) Detach the elsewhere running screen (and reattach here).
-dmS name Start as daemon: Screen session in detached mode.
-D (-r) Detach and logout remote (and reattach here).
-D -RR Do whatever is needed to get a screen session.
-e xy Change command characters.
-f Flow control on, -fn = off, -fa = auto.
-h lines Set the size of the scrollback history buffer.
-i Interrupt output sooner when flow control is on.
-l Login mode on (update /opt/var/run/utmp), -ln = off.
-list or -ls. Do nothing, just list our SockDir.
-L Turn on output logging.
-m ignore $STY variable, do create a new screen session.
-O Choose optimal output rather than exact vt100 emulation.
-p window Preselect the named window if it exists.
-q Quiet startup. Exits with non-zero return code if unsuccessful.
-r Reattach to a detached screen process.
-R Reattach if possible, otherwise start a new session.
-s shell Shell to execute rather than $SHELL.
-S sockname Name this session <pid>.sockname instead of <pid>.<tty>.<host>.
-t title Set title. (window's name).
-T term Use term as $TERM for windows, rather than "screen".
-U Tell screen to use UTF-8 encoding.
-v Print "Screen version 4.00.03 (FAU) 23-Oct-06".
-wipe Do nothing, just clean up SockDir.
-x Attach to a not detached screen. (Multi display mode).
-X Execute <cmd> as a screen command in the specified session.
Error: Specify session-name with -S
/opt/var/run/utmp: No such file or directory
*** rTorrent 0.8.4/0.12.4 - 001346178395:297 ***
[View: main]
(12:48:11) Using 'select' based polling.
(12:48:11) Could not read resource file: ~/.rtorrent.rc
[Throttle off/off KB] [Rate 0.0/ 0.0 KB] [Port: 6932] [U 0/0] [D 0/0] [H 0/32] [S 0/1/768] [FEzt sérelmezi de nem tudom, hogy hogy lehet kijavítani:
Could not read resource file: ~/.rtorrent.rc a kódban pedig jól van hivatkozva.A másik problémálya pedig ez: /opt/etc/init.d/S99rtorrent: 226: gt: not found.
A kódban a 226.sorban ez a parancs áll: esacA process listában pedig így jelenik meg:
175 ? S 0:00 upnp -D -L br0 -W eth1
295 ? Ss 0:00 SCREEN -S -X screen rtorrent
297 pts/2 Ss+ 0:00 rtorrent
298 ? Ss 0:00 dropbear
299 pts/0 Ss 0:00 -sh
302 pts/0 R+ 0:00 ps -axValakinek valami ötelte még, hogy hol kell kijavítanom a kódot?
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
Még egy probléma merült fel a végén mikor telepítem fel a WebUI-t. 7. fejezet
Ami be van linkelve csomag azt hogyan tudom leszedni a routerre, vagy nem oda kell,
vagy csak oda kell ki csomagolni?
A lighttpd root-ja most a www mappa a külső vonyón?
Illetve a configfájlt, hogy tudom meg szerkeszteni mi az elérési útja?Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5126 üzenetére
Mindent értek csak egy a gondom.
Idézet a szövegből: Csomagoljuk ki a lighttpd root-ja alá mundjuk az rtorrent könyvtárba, aztán szerkesszük meg a config.php-t.
Ennek az elérési útja hol található?
A többit már meg tudom csinálni csak ez holvan, azt nemtudom.Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5134 üzenetére
A webUI ezt dobja ki mit tegyek?
[21:30:51] Bad response: (500) <?xml version="1.0" encoding="iso-8859-1"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <title>500 - Internal Server Error</title> </head> <body> <h1>500 - Internal Server Error</h1> </body> </html>[ Szerkesztve ]
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5136 üzenetére
Én is abból dolgoztam de még sem megy,
úgyhogy marad a totózgatás mi nem jó meg mi igen.
Kipróbálam mind a két scriptet magában egyikse jó.
Úgyhogy öteletelek még milehet a gond.Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
még mindig nem tökéletes:
A hiba még mindig ugyan az a webUI-nál.
ps -ax -re meg ez a válasza a programnak:[root@001346178395 root]$ ps -ax
Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html
PID TTY STAT TIME COMMAND
1 ? S 0:01 /sbin/init
2 ? S 0:00 [keventd]
3 ? SN 0:00 [ksoftirqd_CPU0]
4 ? S 0:00 [kswapd]
5 ? S 0:00 [bdflush]
6 ? S 0:00 [kupdated]
7 ? S 0:00 [mtdblockd]
61 ? S 0:00 telnetd
62 ? S 0:00 httpd eth1
68 ? S 0:00 [dnsmasq]
69 ? S 0:00 syslogd -m 0 -O /tmp/syslog.log -S -l 7
70 ? S 0:00 klogd
75 ? S 0:00 [khubd]
83 ? Ss 0:00 lpd
85 ? Ss 0:00 p9100d -f /dev/usb/lp0 0
89 ? Ss 0:00 waveservermain
91 ? Ss 0:00 rcamdmain
95 ? S 0:00 [usb-storage-0]
96 ? S 0:00 [scsi_eh_0]
108 ? Ss 0:00 infosvr br0
109 ? Ss 0:00 watchdog
112 ? Ss 0:00 ntp
118 ? S 0:00 [kjournald]
124 ? S 0:00 dropbear
134 ? Ss 0:00 /usr/sbin/smbd -D -l /opt/var/log/smbd.log -s /opt/et
136 ? Ss 0:00 /usr/sbin/nmbd -D -n ASUS -o -l /tmp -s /opt/etc/samb
153 ? S 0:00 [kjournald]
161 ? S 0:00 /opt/sbin/lighttpd -f /opt/etc/lighttpd/lighttpd.conf
162 ? Ss 0:00 /opt/bin/php-fcgi
163 ? Ss 0:00 /opt/bin/php-fcgi
164 ? Ss 0:00 /opt/bin/php-fcgi
165 ? Ss 0:00 /opt/bin/php-fcgi
166 ? S 0:00 /opt/bin/php-fcgi
167 ? S 0:00 /opt/bin/php-fcgi
168 ? S 0:00 /opt/bin/php-fcgi
169 ? S 0:00 /opt/bin/php-fcgi
175 ? S 0:00 upnp -D -L br0 -W eth1
269 ? Ss 0:00 SCREEN -S -X screen rtorrent
271 pts/2 Ss+ 0:00 rtorrent
272 ? Ss 0:00 dropbear
273 pts/0 Ss 0:00 -sh
277 pts/0 R+ 0:00 ps -ax[ Szerkesztve ]
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5139 üzenetére
azt én nagyon jól tudom de a konfigban keresendő a hiba még mindig.
Be tudnád rakni a konfigodnak egy részét.
SCRIPTNAME=/etc/init.d/$NAME
Eddig a részig mindentElnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #5144 üzenetére
Végre 10 nap után múködik.
WebUI-se ad ki hibát, már csak a letöltést kell tesztelni.173 ? S 0:02 upnp -D -L br0 -W eth1
178 ? Ss 0:01 dropbear
179 pts/0 Ss 0:00 -sh
211 ? Ss 0:00 /opt/bin/SCREEN -dm -S rtorrent
213 pts/1 Ss+ 0:00 /bin/sh
216 pts/2 SNs+ 0:00 /opt/bin/rtorrent -n -o import=/opt/etc/rtorrent.conf
220 pts/0 R+ 0:00 ps -axNagyon szépen köszönöm mindenkinek aki segített.
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz B. Valentine #5142 üzenetére
"mod_accesslog" ) ez után tedd még be ezt is.
scgi.server = ( "/RPC2" => ( "127.0.0.1" => ( "host" => "127.0.0.1", "port" => 5000, "check-local" => "disable")))
Ezt a részt is vedd ki a konfból:
scgi.server = ("/RPC2" =>
( "127.0.0.1" =>
( "host" => "127.0.0.1",
"port" => 5000,
"check-local" => "disable"
)
)
)Tegyél elé # jelet és akkor nem kell törölni.
Én is belettem de nem futott rendesen, ha meg remmeltem akko meg ment.
Egyebet nem tudokén se.
Én az S45 php-t nem módosítottam.Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
Sziasztok
Ami nap folyamán kicsit elrontottam a januári konfigurálásomat így restor-olni kellet a routert így elszállt minden. Gondoltam újra pakolom a jól ismerte tutoriálal de nem jött össze, úgyhogy változtatok. Erre esett a választás link:
[ASUS WL-500g Premium V2 Disk Image File & FlashFS Backup ]Ezzel mielőtt még el kezdeném akad néhány kérdésem.
1. Szimplán csak fel kell pakolni a a goshtal?
2. nekem csak az opt.gho-t kellene fel pakolni, ha csak ezt pakolom fel el tudom későbbiekben érni a 3. partíciót ahol a dolgaim vannak? ezt nem szeretném törölni
Vagy mindent törölnöm kell és úgy rakjam fel?
3. Goshtal egészen pontosan a winyóra kell fel pakolni vagy hova? Ha fel akarom pakolni Windows alól fel tudom?
4 Gondolom ha fel teszem a kép file-t és meg csinálom a le írt változtatásokat akkor működni fog?Köszönöm előre is a segítséget.
Elnézést kérek mindenkitől a helyes írásom ért :)
-
meone
tag
válasz Intruder2k5 #9217 üzenetére
Üdvözlet.
Köszönöm szépen.
Sikerült meg oldani a problémát.Elnézést kérek mindenkitől a helyes írásom ért :)
Új hozzászólás Aktív témák
● Olvasd el az összefoglalót!
Állásajánlatok
Cég: Ozeki Kft.
Város: Debrecen
Cég: Promenade Publishing House Kft.
Város: Budapest