Hirdetés

Aktív témák

  • fobee000

    tag

    válasz ngabor2 #2916 üzenetére

    Bocs hogy így ömlesztve :) Kikapcsoltam az indexelőt, talán javult is valamit. A tapasztalatom hogy indítás után nagyon lassú a rendszer, utána hogy betöltődnek a dolgok kezd javulni(de nem hiszem hogy másfél percig tartana a progik indítása kb egy ilyen gépen), de szerintem ez se tökéletes. A procit meg nem nagyon eszi semmi a "top" szerint. :U

    [ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
    [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
    [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] 126MB HIGHMEM available.
    [ 0.000000] 896MB LOWMEM available.
    [ 0.000000] found SMP MP-table at 000f3590
    [ 0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256 used
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0 -> 4096
    [ 0.000000] Normal 4096 -> 229376
    [ 0.000000] HighMem 229376 -> 261856
    [ 0.000000] early_node_map[1] active PFN ranges
    [ 0.000000] 0: 0 -> 261856
    [ 0.000000] On node 0 totalpages: 261856
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1760 pages used for memmap
    [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 253 pages used for memmap
    [ 0.000000] HighMem zone: 32227 pages, LIFO batch:7
    [ 0.000000] DMI 2.2 present.
    [ 0.000000] ACPI: RSDP signature @ 0xC00F7740 checksum 0
    [ 0.000000] ACPI: RSDP 000F7740, 0014 (r0 IntelR)
    [ 0.000000] ACPI: RSDT 3FEE3000, 0034 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
    [ 0.000000] ACPI: FACP 3FEE3080, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
    [ 0.000000] ACPI: DSDT 3FEE3100, 4C43 (r1 INTELR AWRDACPI 1000 MSFT 3000000)
    [ 0.000000] ACPI: FACS 3FEE0000, 0040
    [ 0.000000] ACPI: MCFG 3FEE7E40, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
    [ 0.000000] ACPI: APIC 3FEE7D80, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
    [ 0.000000] ACPI: SSDT 3FEE84E0, 0380 (r1 PmRef CpuPm 3000 INTL 20041203)
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] Processor #0 6:15 APIC version 20
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] Processor #1 6:15 APIC version 20
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
    [ 0.000000] Built 1 zonelists. Total pages: 259811
    [ 0.000000] Kernel command line: root=UUID=77659b9d-d77c-47cb-9dd1-931e3690fd6b ro quiet splash irqpoll locale=hu_HU
    [ 0.000000] Misrouted IRQ fixup and polling support enabled
    [ 0.000000] This may significantly impact system performance
    [ 0.000000] mapped APIC to ffffd000 (fee00000)
    [ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
    [ 0.000000] Enabling fast FPU save and restore... done.
    [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
    [ 0.000000] Initializing CPU#0
    [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
    [ 0.000000] Detected 3000.165 MHz processor.
    [ 21.534875] Console: colour VGA+ 80x25
    [ 21.535012] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 21.535166] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 21.549688] Memory: 1026304k/1047424k available (2015k kernel code, 20508k reserved, 916k data, 364k init, 129920k highmem)
    [ 21.549693] virtual kernel memory layout:
    [ 21.549693] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
    [ 21.549694] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 21.549695] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    [ 21.549695] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    [ 21.549696] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
    [ 21.549697] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
    [ 21.549697] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
    [ 21.549699] Checking if this processor honours the WP bit even in supervisor mode... Ok.
    [ 21.549716] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    [ 21.629671] Calibrating delay using timer specific routine.. 6014.94 BogoMIPS (lpj=12029896)
    [ 21.629683] Security Framework v1.0.0 initialized
    [ 21.629685] SELinux: Disabled at boot.
    [ 21.629692] Mount-cache hash table entries: 512
    [ 21.629751] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
    [ 21.629755] monitor/mwait feature present.
    [ 21.629756] using mwait in idle threads.
    [ 21.629758] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 21.629759] CPU: L2 cache: 4096K
    [ 21.629761] CPU: Physical Processor ID: 0
    [ 21.629762] CPU: Processor Core ID: 0
    [ 21.629763] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
    [ 21.629767] Compat vDSO mapped to ffffe000.
    [ 21.629774] Checking 'hlt' instruction... OK.
    [ 21.645707] SMP alternatives: switching to UP code
    [ 21.645916] Early unpacking initramfs... done
    [ 21.840200] ACPI: Core revision 20070126
    [ 21.840227] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    [ 21.843237] CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
    [ 21.843246] SMP alternatives: switching to SMP code
    [ 21.843282] Booting processor 1/1 eip 3000
    [ 21.853505] Initializing CPU#1
    [ 21.933376] Calibrating delay using timer specific routine.. 6000.41 BogoMIPS (lpj=12000832)
    [ 21.933380] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
    [ 21.933383] monitor/mwait feature present.
    [ 21.933384] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 21.933385] CPU: L2 cache: 4096K
    [ 21.933386] CPU: Physical Processor ID: 0
    [ 21.933387] CPU: Processor Core ID: 1
    [ 21.933388] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
    [ 21.933846] CPU1: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
    [ 21.933859] Total of 2 processors activated (12015.36 BogoMIPS).
    [ 21.933991] ENABLING IO-APIC IRQs
    [ 21.934145] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 22.081314] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [ 22.101305] Brought up 2 CPUs
    [ 22.162285] migration_cost=12
    [ 22.162356] Booting paravirtualized kernel on bare hardware
    [ 22.162398] Time: 11:56:13 Date: 10/16/107
    [ 22.162408] NET: Registered protocol family 16
    [ 22.162452] EISA bus registered
    [ 22.162454] ACPI: bus type pci registered
    [ 22.189007] PCI: PCI BIOS revision 3.00 entry at 0xfa140, last bus=5
    [ 22.189008] PCI: Using configuration type 1
    [ 22.189009] Setting up standard PCI resources
    [ 22.190959] ACPI: EC: Look up EC in DSDT
    [ 22.193660] ACPI: Interpreter enabled
    [ 22.193662] ACPI: (supports S0 S3 S4 S5)
    [ 22.193671] ACPI: Using IOAPIC for interrupt routing
    [ 22.197200] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [ 22.197204] PCI: Probing PCI hardware (bus 00)
    [ 22.197642] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    [ 22.197645] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
    [ 22.198201] PCI: Transparent bridge - 0000:00:1e.0
    [ 22.198244] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 22.198328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [ 22.198380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
    [ 22.198429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
    [ 22.198479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 22.207976] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *5 7 10 11 14 15)
    [ 22.208044] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *10 11 14 15)
    [ 22.208110] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
    [ 22.208175] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15)
    [ 22.208241] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0, disabled.
    [ 22.208307] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15)
    [ 22.208373] ACPI: PCI Interrupt Link [LNK0] (IRQs 4 5 *7 10 11 14 15)
    [ 22.208438] ACPI: PCI Interrupt Link [LNK1] (IRQs *4 5 7 10 11 14 15)
    [ 22.208501] Linux Plug and Play Support v0.97 (c) Adam Belay
    [ 22.208508] pnp: PnP ACPI init
    [ 22.208512] ACPI: bus type pnp registered
    [ 22.210080] pnp: PnP ACPI: found 14 devices
    [ 22.210081] ACPI: ACPI bus type pnp unregistered
    [ 22.210084] PnPBIOS: Disabled by ACPI PNP
    [ 22.210108] PCI: Using ACPI for IRQ routing
    [ 22.210109] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    [ 22.235820] NET: Registered protocol family 8
    [ 22.235821] NET: Registered protocol family 20
    [ 22.235851] pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
    [ 22.235854] pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
    [ 22.235857] pnp: 00:0d: iomem range 0xf0000-0xfffff could not be reserved
    [ 22.235859] pnp: 00:0d: iomem range 0x3ff00000-0x3fffffff has been reserved
    [ 22.235861] pnp: 00:0d: iomem range 0x3fee0000-0x3fefffff could not be reserved
    [ 22.235862] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
    [ 22.237126] Time: tsc clocksource has been installed.
    [ 22.266000] PCI: Bridge: 0000:00:01.0
    [ 22.266001] IO window: a000-afff
    [ 22.266003] MEM window: f8000000-fbffffff
    [ 22.266005] PREFETCH window: d0000000-dfffffff
    [ 22.266007] PCI: Bridge: 0000:00:1c.0
    [ 22.266009] IO window: 9000-9fff
    [ 22.266012] MEM window: fdb00000-fdbfffff
    [ 22.266014] PREFETCH window: fd800000-fd8fffff
    [ 22.266017] PCI: Bridge: 0000:00:1c.4
    [ 22.266019] IO window: d000-dfff
    [ 22.266022] MEM window: fd700000-fd7fffff
    [ 22.266025] PREFETCH window: fde00000-fdefffff
    [ 22.266028] PCI: Bridge: 0000:00:1c.5
    [ 22.266029] IO window: b000-bfff
    [ 22.266032] MEM window: fdd00000-fddfffff
    [ 22.266035] PREFETCH window: fdc00000-fdcfffff
    [ 22.266038] PCI: Bridge: 0000:00:1e.0
    [ 22.266039] IO window: c000-cfff
    [ 22.266043] MEM window: fda00000-fdafffff
    [ 22.266045] PREFETCH window: fd900000-fd9fffff
    [ 22.266053] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    [ 22.266056] PCI: Setting latency timer of device 0000:00:01.0 to 64
    [ 22.266067] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
    [ 22.266070] PCI: Setting latency timer of device 0000:00:1c.0 to 64
    [ 22.266081] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
    [ 22.266084] PCI: Setting latency timer of device 0000:00:1c.4 to 64
    [ 22.266096] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
    [ 22.266099] PCI: Setting latency timer of device 0000:00:1c.5 to 64
    [ 22.266106] PCI: Setting latency timer of device 0000:00:1e.0 to 64
    [ 22.266111] NET: Registered protocol family 2
    [ 22.305075] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 22.305102] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
    [ 22.305440] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 22.305558] TCP: Hash tables configured (established 131072 bind 65536)
    [ 22.305560] TCP reno registered
    [ 22.317123] checking if image is initramfs... it is
    [ 22.700881] Freeing initrd memory: 7601k freed
    [ 22.701196] audit: initializing netlink socket (disabled)
    [ 22.701205] audit(1195214173.568:1): initialized
    [ 22.701258] highmem bounce pool size: 64 pages
    [ 22.702310] VFS: Disk quotas dquot_6.5.1
    [ 22.702335] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 22.702382] io scheduler noop registered
    [ 22.702384] io scheduler anticipatory registered
    [ 22.702385] io scheduler deadline registered
    [ 22.702392] io scheduler cfq registered (default)
    [ 22.702475] Boot video device is 0000:01:00.0
    [ 22.702520] PCI: Setting latency timer of device 0000:00:01.0 to 64
    [ 22.702540] assign_interrupt_mode Found MSI capability
    [ 22.702542] Allocate Port Service[0000:00:01.0:pcie00]
    [ 22.702586] PCI: Setting latency timer of device 0000:00:1c.0 to 64
    [ 22.702614] assign_interrupt_mode Found MSI capability
    [ 22.702615] Allocate Port Service[0000:00:1c.0:pcie00]
    [ 22.702632] Allocate Port Service[0000:00:1c.0:pcie02]
    [ 22.702681] PCI: Setting latency timer of device 0000:00:1c.4 to 64
    [ 22.702709] assign_interrupt_mode Found MSI capability
    [ 22.702710] Allocate Port Service[0000:00:1c.4:pcie00]
    [ 22.702727] Allocate Port Service[0000:00:1c.4:pcie02]
    [ 22.702778] PCI: Setting latency timer of device 0000:00:1c.5 to 64
    [ 22.702806] assign_interrupt_mode Found MSI capability
    [ 22.702807] Allocate Port Service[0000:00:1c.5:pcie00]
    [ 22.702825] Allocate Port Service[0000:00:1c.5:pcie02]
    [ 22.702907] isapnp: Scanning for PnP cards...
    [ 22.764703] Switched to high resolution mode on CPU 1
    [ 22.768635] Switched to high resolution mode on CPU 0
    [ 23.055327] isapnp: No Plug & Play device found
    [ 23.066725] Real Time Clock Driver v1.12ac
    [ 23.066785] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    [ 23.067391] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
    [ 23.067459] input: Macintosh mouse button emulation as /class/input/input0
    [ 23.067506] PNP: PS/2 Controller [PNP0303;)S2K,PNP0f13;)S2M] at 0x60,0x64 irq 1,12
    [ 23.069582] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 23.069585] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 23.069651] mice: PS/2 mouse device common for all mice
    [ 23.069705] EISA: Probing bus 0 at eisa.0
    [ 23.069726] EISA: Detected 0 cards.
    [ 23.069767] TCP cubic registered
    [ 23.069774] NET: Registered protocol family 1
    [ 23.069785] Using IPI No-Shortcut mode
    [ 23.069871] Magic number: 15:289:934
    [ 23.069999] Freeing unused kernel memory: 364k freed
    [ 23.088303] input: AT Translated Set 2 keyboard as /class/input/input1
    [ 24.213997] AppArmor: AppArmor initialized<5>audit(1195214175.068:2): type=1505 info="AppArmor initialized" pid=1233
    [ 24.221296] fuse init (API version 7.8)
    [ 24.223706] Failure registering capabilities with primary security module.
    [ 24.243981] ACPI: SSDT 3FEE7EC0, 022A (r1 PmRef Cpu0Ist 3000 INTL 20041203)
    [ 24.244142] ACPI: SSDT 3FEE8380, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
    [ 24.244219] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
    [ 24.244225] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
    [ 24.244632] ACPI Error (dswstate-0226): No result objects! State=df8b5800 [20070126]
    [ 24.244635] ACPI Exception (dsutils-0642): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070126]
    [ 24.244637] ACPI Exception (dsutils-0735): AE_AML_NO_RETURN_VALUE, While creating Arg 1 [20070126]
    [ 24.244640] ACPI Error (psparse-0551): Method parse/execution failed [\_TZ_.THRM._TMP] (Node df857078), AE_AML_NO_RETURN_VALUE
    [ 24.251534] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
    [ 24.470221] usbcore: registered new interface driver usbfs
    [ 24.470233] usbcore: registered new interface driver hub
    [ 24.470255] usbcore: registered new device driver usb
    [ 24.471829] USB Universal Host Controller Interface driver v3.0
    [ 24.471858] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
    [ 24.471865] PCI: Setting latency timer of device 0000:00:1a.0 to 64
    [ 24.471867] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 24.471927] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 24.471948] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
    [ 24.472003] usb usb1: configuration #1 chosen from 1 choice
    [ 24.472017] hub 1-0:1.0: USB hub found
    [ 24.472021] hub 1-0:1.0: 2 ports detected
    [ 24.520737] SCSI subsystem initialized
    [ 24.544531] libata version 2.21 loaded.
    [ 24.574463] FDC 0 is a post-1991 82077
    [ 24.574902] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 18
    [ 24.574908] PCI: Setting latency timer of device 0000:00:1a.1 to 64
    [ 24.574910] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 24.574924] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    [ 24.574944] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000fe00
    [ 24.574995] usb usb2: configuration #1 chosen from 1 choice
    [ 24.575008] hub 2-0:1.0: USB hub found
    [ 24.575011] hub 2-0:1.0: 2 ports detected
    [ 24.678777] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
    [ 24.678782] PCI: Setting latency timer of device 0000:00:1d.0 to 64
    [ 24.678784] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 24.678795] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 24.678814] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000fd00
    [ 24.678863] usb usb3: configuration #1 chosen from 1 choice
    [ 24.678876] hub 3-0:1.0: USB hub found
    [ 24.678878] hub 3-0:1.0: 2 ports detected
    [ 24.782673] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
    [ 24.782677] PCI: Setting latency timer of device 0000:00:1d.1 to 64
    [ 24.782679] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 24.782692] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
    [ 24.782711] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000fc00
    [ 24.782762] usb usb4: configuration #1 chosen from 1 choice
    [ 24.782798] hub 4-0:1.0: USB hub found
    [ 24.782801] hub 4-0:1.0: 2 ports detected
    [ 24.886574] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
    [ 24.886579] PCI: Setting latency timer of device 0000:00:1d.2 to 64
    [ 24.886581] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 24.886591] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
    [ 24.886616] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000fb00
    [ 24.886668] usb usb5: configuration #1 chosen from 1 choice
    [ 24.886683] hub 5-0:1.0: USB hub found
    [ 24.886685] hub 5-0:1.0: 2 ports detected
    [ 24.990610] r8169 Gigabit Ethernet driver 2.2LK loaded
    [ 24.990624] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    [ 24.990639] PCI: Setting latency timer of device 0000:03:00.0 to 64
    [ 24.990804] eth0: RTL8168b/8111b at 0xf8816000, 00:50:8d:9c:58:1b, XID 38000000 IRQ 16
    [ 24.992064] ata_piix 0000:00:1f.2: version 2.11
    [ 24.992067] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 24.992078] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
    [ 24.992096] PCI: Setting latency timer of device 0000:00:1f.2 to 64
    [ 24.992127] scsi0 : ata_piix
    [ 24.992221] scsi1 : ata_piix
    [ 24.992276] ata1: SATA max UDMA/133 cmd 0x0001fa00 ctl 0x0001f902 bmdma 0x0001f600 irq 20
    [ 24.992277] ata2: SATA max UDMA/133 cmd 0x0001f800 ctl 0x0001f702 bmdma 0x0001f608 irq 20
    [ 25.194836] ata1.00: ATA-7: ST3320620AS, 3.AAD, max UDMA/133
    [ 25.194838] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 25.261404] ata1.00: configured for UDMA/133
    [ 25.422301] ata2.00: ATA-6: ST3160023AS, 3.00, max UDMA/133
    [ 25.422302] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 25.438302] ata2.00: configured for UDMA/133
    [ 25.438357] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
    [ 25.438418] scsi 1:0:0:0: Direct-Access ATA ST3160023AS 3.00 PQ: 0 ANSI: 5
    [ 25.438445] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
    [ 25.438458] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 20
    [ 25.438473] PCI: Setting latency timer of device 0000:00:1f.5 to 64
    [ 25.438489] scsi2 : ata_piix
    [ 25.438507] scsi3 : ata_piix
    [ 25.438543] ata3: SATA max UDMA/133 cmd 0x0001f300 ctl 0x0001f202 bmdma 0x0001ef00 irq 20
    [ 25.438545] ata4: SATA max UDMA/133 cmd 0x0001f100 ctl 0x0001f002 bmdma 0x0001ef08 irq 20
    [ 25.768192] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21
    [ 25.768199] PCI: Setting latency timer of device 0000:00:1a.7 to 64
    [ 25.768201] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 25.768278] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
    [ 25.768297] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    [ 25.768300] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfdfff000
    [ 25.772175] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [ 25.772346] usb usb6: configuration #1 chosen from 1 choice
    [ 25.772421] hub 6-0:1.0: USB hub found
    [ 25.772425] hub 6-0:1.0: 4 ports detected
    [ 25.873752] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
    [ 25.873757] PCI: Setting latency timer of device 0000:00:1d.7 to 64
    [ 25.873759] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 25.873834] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
    [ 25.873851] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    [ 25.873854] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfdffe000
    [ 25.877734] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [ 25.877905] usb usb7: configuration #1 chosen from 1 choice
    [ 25.877986] hub 7-0:1.0: USB hub found
    [ 25.877990] hub 7-0:1.0: 6 ports detected
    [ 25.981648] ahci 0000:04:00.0: version 2.2
    [ 25.981663] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    [ 26.984497] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [ 26.984500] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    [ 26.984505] PCI: Setting latency timer of device 0000:04:00.0 to 64
    [ 26.984573] scsi4 : ahci
    [ 26.984661] scsi5 : ahci
    [ 26.984752] ata5: SATA max UDMA/133 cmd 0xf888c100 ctl 0x00000000 bmdma 0x00000000 irq 17
    [ 26.984755] ata6: SATA max UDMA/133 cmd 0xf888c180 ctl 0x00000000 bmdma 0x00000000 irq 17
    [ 27.296175] ata5: SATA link down (SStatus 0 SControl 300)
    [ 27.607869] ata6: SATA link down (SStatus 0 SControl 300)
    [ 27.608859] PCI: Enabling device 0000:04:00.1 (0000 -> 0001)
    [ 27.608863] ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 18 (level, low) -> IRQ 21
    [ 27.608885] PCI: Setting latency timer of device 0000:04:00.1 to 64
    [ 27.608911] scsi6 : pata_jmicron
    [ 27.608933] scsi7 : pata_jmicron
    [ 27.608945] ata7: PATA max UDMA/100 cmd 0x0001bf00 ctl 0x0001be02 bmdma 0x0001bb00 irq 21
    [ 27.608947] ata8: PATA max UDMA/100 cmd 0x0001bd00 ctl 0x0001bc02 bmdma 0x0001bb08 irq 21
    [ 27.612946] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 27.612953] sd 0:0:0:0: [sda] Write Protect is off
    [ 27.612954] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 27.612962] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 27.612986] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 27.612991] sd 0:0:0:0: [sda] Write Protect is off
    [ 27.612992] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 27.613001] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 27.613003] sda: sda1 sda2 < sda5 sda6 > sda3
    [ 27.646408] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 27.646431] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
    [ 27.646437] sd 1:0:0:0: [sdb] Write Protect is off
    [ 27.646438] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 27.646446] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 27.646467] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
    [ 27.646472] sd 1:0:0:0: [sdb] Write Protect is off
    [ 27.646474] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 27.646482] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 27.646483] sdb: sdb1 sdb2 < sdb5 >
    [ 27.666889] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 27.668881] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 27.668891] sd 1:0:0:0: Attached scsi generic sg1 type 0
    [ 27.928174] ata7.00: ATAPI: PIONEER DVD-RW DVR-110D, 1.17, max UDMA/66
    [ 27.998265] Attempting manual resume
    [ 27.998266] swsusp: Resume From Partition 8:5
    [ 27.998267] PM: Checking swsusp image.
    [ 27.998440] PM: Resume from disk failed.
    [ 28.029984] kjournald starting. Commit interval 5 seconds
    [ 28.029986] EXT3-fs: mounted filesystem with ordered data mode.
    [ 28.099917] ata7.00: configured for UDMA/66
    [ 28.272878] scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-110D 1.17 PQ: 0 ANSI: 5
    [ 28.272911] scsi 6:0:0:0: Attached scsi generic sg2 type 5
    [ 32.900770] Linux agpgart interface v0.102 (c) Dave Jones
    [ 32.939264] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 32.948002] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 33.025000] iTCO_vendor_support: vendor-support=0
    [ 33.026016] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
    [ 33.026231] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
    [ 33.026440] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 33.076260] input: PC Speaker as /class/input/input2
    [ 33.204251] nvidia: module license 'NVIDIA' taints kernel.
    [ 33.454117] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    [ 33.454123] PCI: Setting latency timer of device 0000:01:00.0 to 64
    [ 33.454186] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
    [ 33.495182] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    [ 33.495185] Uniform CD-ROM driver Revision: 3.20
    [ 33.495224] sr 6:0:0:0: Attached scsi CD-ROM sr0
    [ 33.612219] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    [ 33.612230] PCI: Setting latency timer of device 0000:00:1b.0 to 64
    [ 33.817782] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
    [ 34.034651] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input3
    [ 34.309700] lp: driver loaded but no devices found
    [ 34.345514] Adding 1951856k swap on /dev/sda5. Priority:-1 extents:1 across:1951856k
    [ 34.532539] EXT3 FS on sda6, internal journal
    [ 34.825830] kjournald starting. Commit interval 5 seconds
    [ 34.825936] EXT3 FS on sda1, internal journal
    [ 34.825938] EXT3-fs: mounted filesystem with ordered data mode.
    [ 37.374509] DLM (built Oct 14 2007 23:06:04) installed
    [ 37.383273] GFS2 (built Oct 14 2007 23:06:38) installed
    [ 37.384954] Lock_DLM (built Oct 14 2007 23:06:53) installed
    [ 37.498021] NET: Registered protocol family 10
    [ 37.498071] lo: Disabled Privacy Extensions
    [ 48.616375] SCTP: Hash tables configured (established 65536 bind 65536)
    [ 48.651301] Module sctp cannot be unloaded due to unsafe usage in /build/buildd/linux-source-2.6.22-2.6.22/net/sctp/protocol.c:1179
    [ 49.470737] r8169: eth0: link up
    [ 49.470744] r8169: eth0: link up
    [ 52.258905] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [ 52.328643] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    [ 52.337981] NFSD: starting 90-second grace period
    [ 53.141848] Failure registering capabilities with primary security module.
    [ 58.283868] NET: Registered protocol family 17
    [ 72.955458] eth0: no IPv6 routers present
    fobee@fobee-ubuntu:/var/log$

    ''Nincs az az elba**ott helyzet, amin ne lehetne szívós, kitartó munkával még tovább rontani''

Aktív témák