Új hozzászólás Aktív témák

• #788 tothztemp csendes tag

  Új Válasz 2015-09-26 19:22:54 #788

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  tothztemp

  csendes tag

  Vannak itt is erdekessegek:http://www.overclock.net/t/1545188/asus-p5q3-x5460-no-post

  Originally Posted by gagarin77 View Post

  Hi I had like 100 Xeons running on my P5Q3 Deluxe. Both of the motherboards you mentioned should be OK for this mod.

  You need to do some checking on your modded equipment.

  1. Make sure you have default settings in the BIOS before installing Xeon (All settings Auto, no OC, Advanced C state C2/C3 - Disabled).
  2. Check the plastic tabs in the socket - they should be cut straight to the bottom and be exactly even with the frame. (this is the usual cause most of the time when people say they rig refuses to POST)
  3. Check if adapter is in the right place (correct row/column)
  4. Make sure you are installing Xeon oriented correctly - with the golden triangle corresponding to the one on the socket's latch and PCB. I recommend to move the cpu few times from side to side before locking it.
  5. Check if the cpu heat sink has all its mounts locked correctly.

  In your case there is also a possibility that you have problems related to RAM so you should try with only one module (preferably installed in the last slot).

  Oh I nearly forgot I had one additional plastic tab on P5Q3 DLX - lying horizontally at the bottom of the socket, near the frame. I cold run the mod with this bar still there but it was causing to flatter the adhesive side of the adapter, so I cut it out.
  http://www.overclock.net/t/1431723/mod-lga775-support-for-lga771-xeon-cpus/3330#post_22215699
  http://www.overclock.net/t/1431723/mod-lga775-support-for-lga771-xeon-cpus/3340#post_22218188

Új hozzászólás Aktív témák